Videos

>

Mesh Adaption in Ansys Fluent - Part 1

Nov 21, 2024 - In Part 1, you will observe the model setup and the application of mesh adaptation based on wall boundary layers and pressure gradient. It will demonstrate how these adaptations fu...

>

Ansys Discovery Room Ventilation Simulation

Nov 20, 2024 - The video demonstrates how effortlessly a classroom model can be created, set up, and its air distribution simulated using Ansys Discovery.

>

Modeling Phase Change During Adiabatic Expansion with ANSYS CFD Simulation

Nov 9, 2024 - In this video, we explain the setup for the phase change of water during adiabatic expansion and how to verify the results for condensation. Ozen Engineering Inc. leverages its ...

>

CFD Analysis of Cooling in Adiabatic Expansion

Nov 6, 2024 - This video demonstrates the process of creating a CFD model that analyzes the cooling effects of adiabatic expansion. It also explores how the size of the opening influences these ...

>

Fiber Core and Clad Modeling with Mixed Mode in Zemax

Oct 30, 2024 - This video describes modeling core and cladding of optical fibers, the two main components that enable light transmission through Zemax.

>

LiDAR Simulation Guide: Using ANSYS SPEOS for Best Results

Oct 16, 2024 - In this comprehensive LiDAR simulation tutorial, I walk you through setting up a rotating LiDAR system using ANSYS SPEOS 2024 R2. From defining geometry, sensor sources, and materi...

>

Simulating Light from Free Space to Nano-Scale: Dynamic Link Between Zemax & Lumerical-Part1

Oct 12, 2024 - In this video, I explore the dynamic integration between Zemax (ray optics) and Lumerical (wave optics) to simulate light propagation from free space to the nano-scale. This powerf...

>

Electrodynamic Force Calculation on Bus Bars using Maxwell

Oct 11, 2024 - Three-phase short circuit events are critical in electrical systems where an unintended connection between three phases leads to a significant surge of current. These events can ca...

>

Model Building Part 2 ECAD import NC Meshing - Ansys Icepak

Oct 10, 2024 - This video showcases the powerful Non-Conformal Meshing feature in Ansys Icepak, a game-changing capability that revolutionizes thermal simulation for electronic systems. Non-confo...

>

Model Building Part 2 ECAD import - Ansys Icepak

Oct 4, 2024 - Ansys Icepak’s ECAD import simplifies thermal analysis by allowing seamless integration of electronic designs directly from ECAD tools. It enables the import of PCB layouts and c...

>

ANSYS HFSS: Array Analysis Using The Array Factor Calculation

Oct 3, 2024 - Hi there! This video shows how to use the ANSYS HFSS built in array factor calculation method to compute antenna array radiation pattern for designs that have analyzed a single arr...

>

Description of laser propagation with ZBF file in Zemax

Sep 24, 2024 -

>

Vibrating Screen Simulation, Part I: Efficiency

Sep 19, 2024 - In this video, you’ll learn how to set up the model and calculate screen efficiency over time. Follow the procedure for your own geometry and operating conditions. In this demo, ...

>

Vibrating Screen Simulation, Part II: Optimization

Sep 19, 2024 - Building on the setup shown in the first video, OptiSLang is used to run the optimization with two input parameters. The screen efficiency is maximized, reaching 98%—a 31% improv...

>

MotorCAD: Skin and Proximity Effect losses in Stator Windings

Sep 13, 2024 - MotorCAD is capable of accurately solving full FEA AC conductor losses, considering the placement of the conductor within the slot. Both single-slot and multi-slot calculations are...

>

Ansys Maxwell: Core and Magnet Losses in Electric Motors

Sep 11, 2024 - Eddy current losses in magnets affect the efficiency and thermal performance of electric motors. They occur when alternating magnetic fields induce loops of electrical current with...

>

Dam Breakup Simulation Using Ansys Fluent

Sep 11, 2024 - The video walks through the details of VOF multiphase modeling starting from geometry generation with SpaceClaim, meshing, model and simulation setting, and finally post-processing...

>

Crash course: Induced voltage analysis using SIwave and AEDT Circuit.

Sep 2, 2024 - This short video shows how to do Induced voltage analysis for a PCB, for EMI susceptibility, in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading pro...

>

Crash course: FarField analysis using SIwave and AEDT Circuit.

Sep 2, 2024 - This short video shows how to do FarField analysis for a power planes and RF lines in a PCB, for EMI compliance, in less than 2 minutes. About Ozen Engineering: Ozen Engineer...

>

Crash course: NearField analysis using SIwave.

Sep 2, 2024 - This short video shows how to do Nearfield analysis for a power planes and RF lines in a PCB, to debug EMI, in less than 2 minutes. About Ozen Engineering: Ozen Engineering i...

>

Crash course: Frequency sweep analysis using SIwave and AEDT Circuit.

Sep 2, 2024 - This short video shows how to do frequency sweep analysis for a power planes and RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leadi...

>

Crash course: SIwizard analysis using SIwave and AEDT Circuit.

Sep 1, 2024 - This short video shows how to do SIwizard analysis of RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ansys solut...

>

Crash course: TDR analysis using SIwave and AEDT Circuit

Sep 1, 2024 - This short video shows how to do TDR analysis of RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ansys solutions,...

>

Crash course: Crosstalk scan using SIwave.

Sep 1, 2024 - This short video shows how to do Crosstalk scan of all the RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ansys ...

>

Crash course: Resonant modes using SIwave.

Sep 1, 2024 - This short video shows how to do Resonant modes of all the powerplanes in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ans...

>

Crash course: Zo scan using SIwave.

Sep 1, 2024 - This short video shows how to do Zo scan of all the RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ansys solutio...

>

Flownex Video: Crude Oil Network in Flownex – Part 2

Aug 24, 2024 - Transient simulation in Flownex can be a valuable tool in oil pipeline simulation technology. It can be used to assess the impact of sudden changes in thermal crude oil boundary co...

>

Flownex Video: Crude Oil Network in Flownex – Part 1

Aug 24, 2024 - TThe oil and gas industry often utilizes pipeline simulation to simulate the movement of crude oil. To accurately predict the pipeline's flow rate, it's important to consider the t...

>

Aspherical Lens for Thin Laser Beam Uniformity

Aug 19, 2024 -

>

Optimetrics Setup in AEDT Icepak

Aug 16, 2024 - See how to setup parametric trials (sweeps) in Ansys AEDT Icepak

>

Manual powerplanes decoupling capacitors design using SIwave

Aug 16, 2024 - There are many techniques to determine the necessary decoupling caps for a PCB powerplane. In this video, we present a manual way to do the design, using one of the tools inside SI...

>

Surface Relief Grating Design for AR and HUDs

Aug 16, 2024 - In this video, we dive deep into the design and optimization of surface relief gratings using Lumerical, a powerful photonic simulation tool by Ansys. Whether you're working on aug...

>

Ansys Fluent Aeroacoustics

Aug 14, 2024 - Dive into Computational Fluid Dynamics (CFD) with our comprehensive guide to acoustics and the Ansys Fluent Aeroacoustics solver. This video, brought to you by Ozen Engineering, In...

>

Modeling Realistic Fans with Ansys Icepak

Aug 3, 2024 - Discover the power of advanced fan modeling in CFD simulations with our latest video on the Moving Reference Frame (MRF) approach in Ansys Icepak. We demonstrate how this method si...

>

Heat transfer in Flow Network in Flownex

Aug 1, 2024 - This video teaches you how to incorporate a heat transfer element into a flow network in Flownex. You'll also discover how to define the heat transfer mechanisms involved in the pr...

>

Flownex: Creating new fluid materials

Aug 1, 2024 - This video shows how to create a new fluid material for a flow network in Flownex that is not available in the Flownex library and how to use it in a problem.

>

Flownex: Flow Netwrok

Aug 1, 2024 - This video demonstrates how to create a flow network in Flownex, which includes pipes, nodes, and reservoirs. It explains how to define specifications for each flow element, such a...

>

Using Design Parameters with Ansys Icepak

Jul 25, 2024 - Utilizing design parameters allows quick adjustments to frequently used parameters without redefining the entire model. This efficiency is particularly beneficial when setting up m...

>

3DLayout to Icepack looping example

Jul 18, 2024 - The following example illustrates the use of 3D Layout and Icepack to perform thermal analysis. HFSS can be used with Icepack, but not with DC. SIwave and Icepack can also be used ...

>

Thermoelectric Cooler (TEC) Modeling with Ansys Icepak

Jul 17, 2024 - In this 23-minute tutorial video, we demonstrate how to simulate a PCB (printed circuit board) with a heat-generating package cooled by a Thermoelectric Cooler (TEC) using Ansys Ic...

>

Ansys EnSight Application: Plotting a Variable Along a Rotating Component

Jul 13, 2024 - This video is a valuable resource for engineers and professionals in the field of Computational Fluid Dynamics (CFD). It provides a detailed step-by-step guide on how to plot a var...

>

Joule (trace) Heating Simulation with Ansys Icepak

Jul 13, 2024 - This video presents a comprehensive workflow for simulating Joule heating using Ansys Icepak, a powerful tool for thermal management in electronics. Building upon our previous tuto...

>

PCB Modeling with Ansys Icepak

Jul 13, 2024 - This video provides an in-depth look at the thermal modeling of Printed Circuit Boards (PCBs) using Ansys Icepak, a powerful tool for electronics thermal management. PCBs are compl...

>

Solving DC and AC Inductance in Ansys Q3D

Jul 12, 2024 - Hi there! This video shows how to solve for both DC and AC inductance using Ansys Q3D. At Ozen Engineering Inc. (https://www.OzenInc.com) we help engineers learn how to use Ansys ...

>

KLayout: Connection to Lumerical, and Introduction to WDM-part 3 (WDM)

Jul 11, 2024 - In this video, we'll dive into how to efficiently use KLayout and connect it to Lumerical. We'll start with the necessary libraries for installation and provide a hands-on example ...

>

Connection to Lumerical, and Introduction to WDM-part 2 ( Connection to Lumerical)