Ozen Videos

Aug 8, 2025 - Hi there! This video shows how to perform mechanical stress and deformation analysis of a high-speed PMSM rotor using both Ansys Mechanical and Motor-CAD, comparing workflows, resu...

Creating a Reduced order Model for Vortex Prediction in Stirred Tank

Aug 5, 2025 - The video walks through the steps to create a Reduced order Model (ROM) for vortex prediction in a stirred tank. The corresponding Ozen Engineering blog can be found: https://blog...

Designing a 3-Phase Inverter in Ansys Simplorer and Coupling with Maxwell FEA for a 160kW PMSM

Aug 1, 2025 - Hi there! This video shows how to design a 3-phase inverter in Ansys Simplorer and couple it with a detailed Maxwell FEA model for a 160kW PMSM, including both battery-fed and grid...

PCIe Gen4 Signal Integrity Analysis using ANSYS SIwave & Circuit Tools

Jul 31, 2025 - Hi there! This video shows how ANSYS SIwave and ANSYS Nexxim transient solvers can be used to perform PCIe Gen4 signal integrity (SI) analysis for ensuring reliable high speed data...

Brain Implant Thermal Simulation Using Ansys Fluent

Jul 28, 2025 - This video provides a setup of a thermal simulation of a brain implant using Ansys Fluent. It showcases Fluent’s capability to simulate the thermal impact of a brain implant on ...

How to Set Up Flip-Chip Junction to Board and Junction to Case Thermal Analysis Using Ansys Fluent

Jul 28, 2025 - Hi there! This video shows how to set up your case for thermal characterization of a flip chip, with the aim of calculating the junction to board and junction to case thermal resis...

Modeling Bubble Dynamics in a Stirred Tank Reactor Using ANSYS Fluent and Population Balance Model

Jul 28, 2025 - This video showcases the simulation of bubble dynamics in a stirred tank reactor using ANSYS Fluent with the Population Balance Model (PBM) – Discrete Method. It demonstrates Flu...

Sintering Process Simulation in Ansys Rocky

Jul 25, 2025 - This video walks through a simplified powder compaction and sintering process using particle-based simulation. It covers material setup, motion stages, particle injection, solver c...

Modeling of a Buck Converter at the System Level with ANSYS

Jul 24, 2025 - In this video, a buck converter is modeled using ANSYS PExprt and Simplorer at the system level. The performance of the buck converter in open-loop and PID-controlled operation is ...

Induction Heating Modeling with ANSYS

Jul 23, 2025 - In this video, two approaches are demonstrated to model the induction heating problem by using ANSYS tools. Approach 1: Maxwell and Mechanical coupling using ANSYS System Coupling...

How to Simulate Electric Motor Temperature Using Ansys Motor-CAD and Icepak

Jul 23, 2025 - How to Simulate Electric Motor Heating Using Ansys Motor-CAD and Icepak Hi there! This video walks you through two powerful methods for simulating the thermal performance of elect...

Simulation of Steady Vortex in a Stirred Tank using Ansys Fluent

Jul 21, 2025 - The video walks through the details of the multiphase model settings and post-processing steps for the simulation of steady vortex in a stirred tank using Ansys Fluent. The corresp...

ANSYS Maxwell: Wireless Charging Systems with Permanent Magnets

Jul 16, 2025 - In this video, one of the possible workflows for modeling and characterizing wireless charging coils with permanent magnets are presented. The models are created and simulated in A...

How to Automate Current Datasets for Each Parametric Case in Ansys Maxwell

Jul 16, 2025 - Hi there! This video shows how to automate current datasets for each parametric case in Ansys Maxwell and its potential uses. Please check out our blog: https://hubs.ly/Q03xsXqs0 ...

Scripting for postprocessing in Icapak AEDT

Jul 16, 2025 - This video demonstrates how to create a Python script by recording the operations performed by a user in Icepak. It also shows how to modify this script to automate the creation of...

External Aerodynamics over Ahmed Body Benchmark with Ansys Discovery in Explore Mode

Jul 11, 2025 - The Ahmed body is a simplified, vehicle geometry and is a well-known CFD benchmark for vehicle external aerodynamics. This video walks through the details of the application in Ans...

Accelerating Sharing in Ansys Discovery

Jul 10, 2025 - This video demonstrates how to use rendering quality to reduce the time needed for sharing topology in Ansys Discovery for large models with thousands of edges and faces. Here are...

Sharing Topology in Ansys Discovery Using Scripting

Jul 10, 2025 - This video demonstrates how to create a script when performing sharing and unsharing topology in Ansys Discovery, including using the script on another model. It also shows how to ...

Conducted Emission Simulation of An Electric Vehicle

Jul 1, 2025 - Hi there! This video shows how the ANSYS HFSS combined with ANSYS Circuit tool will be used to run a conducted emission analysis of full electric vehicle Including chassis, batt...

Conjugate Heat Transfer of an inverter in Ansys Icepak AEDT

Jun 30, 2025 - This video demonstrates how to perform a 3D conjugate heat transfer (CHT) simulation of an inverter including liquid cooling in Icepak AEDT. -------------------------------------...

Dynamic Mesh Motion in Fluent - Piezoelectric Actuators 2

Jun 30, 2025 - This video is the second part in our series focusing on dynamic mesh motion in Fluent for CFD simulation of piezoelectric actuators. In this part, we explore various material model...

Dynamic Mesh Motion in Fluent - Piezoelectric Actuators 1

Jun 30, 2025 - This is the first part of a video series on using dynamic mesh motion in Fluent for the CFD simulation of piezoelectric actuators. It showcases the examples of piezoelectric actuat...

Explore Battery Cold Plate Concepts Using Ansys Discovery CFD Simulation

Jun 30, 2025 - This video provides a setup of a conjugate heat transfer simulation of a battery module cold plate. It showcases Discovery’s capability to simulate flow and heat transfer rapidl...

Using Expression Input in HFSS and Maxwell's Fields Calculator

Jun 28, 2025 - Hi there! This video shows how to enable support for expression input in the Fields Calculator for HFSS and Maxwell. Please check out our blog: https://blog.ozeninc.com/resources/...