Ozen Videos

Jul 25, 2025 - This video walks through a simplified powder compaction and sintering process using particle-based simulation. It covers material setup, motion stages, particle injection, solver c...

Jul 24, 2025 - In this video, a buck converter is modeled using ANSYS PExprt and Simplorer at the system level. The performance of the buck converter in open-loop and PID-controlled operation is ...

Jul 23, 2025 - In this video, two approaches are demonstrated to model the induction heating problem by using ANSYS tools. Approach 1: Maxwell and Mechanical coupling using ANSYS System Coupling...

Jul 23, 2025 - How to Simulate Electric Motor Heating Using Ansys Motor-CAD and Icepak Hi there! This video walks you through two powerful methods for simulating the thermal performance of elect...

Jul 21, 2025 - The video walks through the details of the multiphase model settings and post-processing steps for the simulation of steady vortex in a stirred tank using Ansys Fluent. The corresp...

Jul 16, 2025 - In this video, one of the possible workflows for modeling and characterizing wireless charging coils with permanent magnets are presented. The models are created and simulated in A...

Jul 16, 2025 - Hi there! This video shows how to automate current datasets for each parametric case in Ansys Maxwell and its potential uses. Please check out our blog: https://hubs.ly/Q03xsXqs0 ...

Jul 16, 2025 - This video demonstrates how to create a Python script by recording the operations performed by a user in Icepak. It also shows how to modify this script to automate the creation of...

Jul 11, 2025 - The Ahmed body is a simplified, vehicle geometry and is a well-known CFD benchmark for vehicle external aerodynamics. This video walks through the details of the application in Ans...

Jul 10, 2025 - This video demonstrates how to use rendering quality to reduce the time needed for sharing topology in Ansys Discovery for large models with thousands of edges and faces. Here are...

Jul 10, 2025 - This video demonstrates how to create a script when performing sharing and unsharing topology in Ansys Discovery, including using the script on another model. It also shows how to ...

Jul 1, 2025 - Hi there! This video shows how the ANSYS HFSS combined with ANSYS Circuit tool will be used to run a conducted emission analysis of full electric vehicle Including chassis, batt...

Jun 30, 2025 - This video demonstrates how to perform a 3D conjugate heat transfer (CHT) simulation of an inverter including liquid cooling in Icepak AEDT. -------------------------------------...

Jun 30, 2025 - This video is the second part in our series focusing on dynamic mesh motion in Fluent for CFD simulation of piezoelectric actuators. In this part, we explore various material model...

Jun 30, 2025 - This is the first part of a video series on using dynamic mesh motion in Fluent for the CFD simulation of piezoelectric actuators. It showcases the examples of piezoelectric actuat...

Jun 30, 2025 - This video provides a setup of a conjugate heat transfer simulation of a battery module cold plate. It showcases Discovery’s capability to simulate flow and heat transfer rapidl...

Jun 28, 2025 - Hi there! This video shows how to enable support for expression input in the Fields Calculator for HFSS and Maxwell. Please check out our blog: https://blog.ozeninc.com/resources/...

Jun 27, 2025 - Hi there! This video shows how to export a coil layout from HFSS 3D Layout to HFSS while preserving the correct stackup shape, set up the coil simulation in HFSS, and link the mode...

Jun 27, 2025 - This video goes over the Sintering Addon in Ansys Mechanical. It walks the user through the Sintering Wizard and shows a few of the different options we have to simulate the sinter...

Jun 26, 2025 - This video shows how to create 3D Axial Flux Motor models in ANSYS Maxwell. Please check out our blog: At Ozen Engineering Inc. (https://hubs.ly/Q03tYlZC0) we help engineers ...

Jun 26, 2025 - ML based geometry prediction with a Stochos App. Associated blog can be found in the below link: https://blog.ozeninc.com/resources/3d-geometry-prediction-using-pi-bo-optimization-...

Jun 25, 2025 - This video provides a setup of a multiphase simulation of 3 phases using Ansys CFX. It showcases CFX’s capability to simulate free surface stratification and flow with oil, wate...

Jun 23, 2025 - This video shows how to assign different magnetization directions for magnets in permanent magnet motors. Three different types of magnetization directions are discussed: Parallel,...

Jun 22, 2025 - The video goes through the steps of static ROM building for a simple mixing elbow CFD application. The associated blog can be found: https://blog.ozeninc.com/resources/twin-builde...

Jun 20, 2025 - Zemax Polarization features and Jones Vectors. A basic review of Jones Calculus format and how Zemax employs this in the software as inputs and outputs. Use and understanding of Jo...

Jun 18, 2025 - Slash FDTD runtimes from hours to minutes! See how Ansys Lumerical + Cloud Burst GPUs (RTX A6000, A100 80 GB, 4× L40S) chew through a 0.85-billion-cell metalens simulation and lea...

Jun 13, 2025 - Hi there! In this video, we will walk through the process of setting up a coaxial cable simulation in HFSS and plotting the insertion loss, return loss, and electric field distribu...

Jun 11, 2025 - The video walks through the steps of meshing the generated blade model in TurboGrid, setting the turbo mode in CFX, and post-processing with CFD-Post

Jun 11, 2025 - The video walks through the steps to generate an adjustable blade model from an initial CAD design

Jun 6, 2025 - Hi there! This video shows how to use the Eigenmode solver in Ansys HFSS by analyzing a silver-plated coaxial resonator. The example highlights how the solver computes both the res...

Jun 5, 2025 - This video provides a setup of a Digital Twin simulation using Ansys Fluent and Ansys Twin Builder. It showcases Digital Twin’s capability to quickly simulate battery module cel...

Jun 5, 2025 - In this video we use one part of the Ansys TurboTools to perform a one-dimensional analysis of a radial pump.

May 30, 2025 - Hi there! This video shows how to enable additional CPU cores and GPU in Ansys Electronics Desktop. Please check out our blog: https://blog.ozeninc.com/resources/enabling-addition...

May 30, 2025 - This video shows how to make on-the-fly design changes on a HVAC duct system to optimize flow distribution. Please check out our blog: (https://blog.ozeninc.com/resources/on-the-fl...

May 28, 2025 - Hi there! This video shows how Ansys Q3D Extractor can be used to compute capacitance values, starting with a basic parallel plate capacitor and then moving to a cutout from a MEMS...

May 27, 2025 - In this video learn how to setup a model in Ansys Fluent to obtain results of particle deposition when using the Discrete Phase Model.

May 26, 2025 - This is the third part of a video series on dynamic mesh motion in Fluent for CFD simulation. It features examples of vertical, horizontal, and general planar mesh motion. The Flu...

May 24, 2025 - This is the second part of a video series about dynamic mesh motion in Fluent for CFD simulation. It provides a step-by-step demonstration of implementing dynamic mesh motion for a...

May 23, 2025 - This video provides a detailed explanation of the steps for dynamic mesh motion in Fluent, including examples of moving mesh using layering, smoothing, and remeshing techniques. ...

May 22, 2025 - A transfer chute is a crucial component in bulk material handling systems, commonly used in the mining industry to guide and control the flow of materials between different conveyo...

May 22, 2025 - Learn how to set up and run a simulation that shows surface wear effects, visualize the resulting modifications, include particle trajectories, and analyze contact-derived properti...

May 22, 2025 - In this video, we demonstrate how to run a CFD model with Ansys Fluent using multiple CPU cores and evaluate the running time based on the number of CPU cores utilized for the simu...

May 16, 2025 - This video walks thorough the details of the Probabilistic Inference for Bayesian Optimization Application on a 2D Benchmark Case. The optimization tool is an embedded feature with...

May 14, 2025 - This demo shows how to simulate a bucket conveyor system in Rocky DEM. We applied linear motion to the buckets, enabled periodicity, and calculated the timing for both straight and...

May 14, 2025 - This video shows how to sdo one-click and advanced meshing on a simple electronics cooling problem using Ansys AEDT Icepak. Please check out our blog: (https://blog.ozeninc.com/res...

May 13, 2025 - This video provides a setup of a pressing/thermoforming analysis in Ansys Fluent Polyflow. It showcases Polyflow’s capability to predict blow molded shapes. Key highlights of...

May 13, 2025 - This video provides a setup of an injection blow molding analysis in Ansys Fluent Polyflow. It showcases Polyflow’s capability to predict blow molded shapes. Key highlights o...

May 13, 2025 - Stretch blow molding This video provides a setup of a stretch blow molding analysis in Ansys Fluent Polyflow. It showcases Polyflow’s capability to predict blow molded shapes. ...