Ozen Videos

Viewing 13-24 of 503

Geometry Prediction using Data from Optimization: A Stochos App Application

Jun 26, 2025 - ML based geometry prediction with a Stochos App. Associated blog can be found in the below link: https://blog.ozeninc.com/resources/3d-geometry-prediction-using-pi-bo-optimization-...

Oil Slicks - 3-phase stratified and free surface flow CFX simulation

Jun 25, 2025 - This video provides a setup of a multiphase simulation of 3 phases using Ansys CFX. It showcases CFX’s capability to simulate free surface stratification and flow with oil, wate...

ANSYS MotorCAD: Assign Different Magnetization Patterns for Permanent Magnet Motors

Jun 23, 2025 - This video shows how to assign different magnetization directions for magnets in permanent magnet motors. Three different types of magnetization directions are discussed: Parallel,...

Ansys Twin Builder CFD Example: Building, Validating, and Evaluating Static ROM

Jun 22, 2025 - The video goes through the steps of static ROM building for a simple mixing elbow CFD application. The associated blog can be found: https://blog.ozeninc.com/resources/twin-builde...

Ansys Zemax - Polarization Basics

Jun 20, 2025 - Zemax Polarization features and Jones Vectors. A basic review of Jones Calculus format and how Zemax employs this in the software as inputs and outputs. Use and understanding of Jo...

Accelerating FDTD Simulations with GPU: Ansys Lumerical + Cloud Burst Demo

Jun 18, 2025 - Slash FDTD runtimes from hours to minutes! See how Ansys Lumerical + Cloud Burst GPUs (RTX A6000, A100 80 GB, 4× L40S) chew through a 0.85-billion-cell metalens simulation and lea...

Coaxial Cable Simulation in Ansys HFSS

Jun 13, 2025 - Hi there! In this video, we will walk through the process of setting up a coaxial cable simulation in HFSS and plotting the insertion loss, return loss, and electric field distribu...

Blade Modeling Application Part2: Workflow from an adjustable blade generation to simulation

Jun 11, 2025 - The video walks through the steps of meshing the generated blade model in TurboGrid, setting the turbo mode in CFX, and post-processing with CFD-Post

Blade Modeling Application Part1: Workflow from the initial CAD design to a new adjustable model

Jun 11, 2025 - The video walks through the steps to generate an adjustable blade model from an initial CAD design

Coaxial Resonator Eigenmode Analysis in HFSS

Jun 6, 2025 - Hi there! This video shows how to use the Eigenmode solver in Ansys HFSS by analyzing a silver-plated coaxial resonator. The example highlights how the solver computes both the res...

Digital Twin: Battery Module Simulation with Linear Time Invariant Reduced Order Model

Jun 5, 2025 - This video provides a setup of a Digital Twin simulation using Ansys Fluent and Ansys Twin Builder. It showcases Digital Twin’s capability to quickly simulate battery module cel...