Videos > SIwave in 2 Minutes: Modify a trace geometry
Jun 6, 2023
SIwave in 2 Minutes: Modify a Trace Geometry
If you have a trace in SIwave and you would like to modify its dimensions, direction, or location, follow these steps:
- Select the trace you wish to modify.
- Immediately look at the properties panel.
- Locate the Center Line option and press Edit.
Once you press Edit, you will be able to:
- Expose all the points used to construct the center line of your trace.
- Modify these points as needed.
- Adjust the width of each section according to your requirements.
- Add additional points if necessary.
- Delete any unwanted points.
Thank you for watching!
[This was auto-generated. There may be mispellings.]
Title: "Modifying a Trace Geometry in SIwave in 2 Minutes" --- How to modify a trace in SIwave?
If you have a trace in SIwave and you would like to modify its dimensions or location, follow these steps: 1. Select the trace. 2. Look at the properties and find the center line. 3. Press "Edit" to expose all the points used to construct the center line of your trace. 4. Modify the points as desired. 5. Modify the width of each section as needed. 6. Add or delete points as necessary.
Thank you.
