Ozen Videos
>
How to Evaluate Hemolysis Risk in Medical Devices using Ansys CFD
Jul 7, 2023 - Learn how to use Ansys CFD to assess the risk of hemolysis in cardiovascular devices. This video will walk through selecting suitable blood models, defining device geometry and bou...
>
Multilevel diffractive lenses design simulation using Ansys Lumerical
Jul 6, 2023 - In this video, we look at how to design, simulation and optimize a multilevel diffractive lenses system. These devices are compact and can be fabricated at low cost for large volum...
>
SIwave: Everything you need to know about the PI solver (HD version)
Jul 5, 2023 - Real HD version
Read the blog article: https://blog.ozeninc.com/resources/siwave-unleash-the-power-of-pi-solver
This short video shows the many things that a user will get from u...
>
SIwave: Everything you need to know about the DC IR solver (HD)
Jul 5, 2023 - Real HD version
Read the blog article: https://blog.ozeninc.com/resources/siwave-unleash-the-power-of-the-dcir-solver
This short video shows the many things that a user will get ...
>
SIwave: Everything you need to know about the Resonant Mode solver (HD)
Jul 5, 2023 - True HD version
Read the blog article: https://blog.ozeninc.com/resources/siwave-unleash-the-power-of-the-resonant-mode-solver
Resonant mode solver detect all the resonance in t...
>
SIwave: Everything you need to know about the MTTF solver (HD)
Jul 5, 2023 - True HD version
Read the blog article: https://blog.ozeninc.com/resources/siwave-unleash-the-power-of-the-mttf-solver
MTTF stands for the median time to failure. MTTF is derived...
>
SIwave: Everything you need to know about the ZoScan solver (HD)
Jul 4, 2023 - True HD version
Read the blog article: https://blog.ozeninc.com/resources/siwave-unleash-the-power-of-the-zoscan-solver
This short video shows the many things that a user is abl...
>
SIwave: Everything you need to know about the Induced Voltage solver (HD)
Jul 4, 2023 - Read the article for more information: https://blog.ozeninc.com/resources/siwave-unleash-the-power-of-the-induced-voltage-solver
Induced voltage solver calculates the voltage seen...
>
Ansys Fluent: Automotive Selective Catalytic Reduction
Jun 26, 2023 - Read the blog article: https://blog.ozeninc.com/resources/how-to-setup-a-basic-automotive-selective-catalytic-reduction-problem-using-ansys-fluent
The video showcases how a basic...
>
SIwave: Everything you need to know about the Resonant Mode solver (SD)
Jun 26, 2023 - Read the blog article: https://blog.ozeninc.com/resources/siwave-unleash-the-power-of-the-resonant-mode-solver
Resonant mode solver detect all the resonance in the design, and hel...
>
EMA3D Shielding Effectiveness of a Box Demo (6/6): Analyzing Results
Jun 24, 2023 - Hi there! This tutorial demonstrates the Ansys EMA3D Cable workflow for a high intensity radiated field (HIRF) simulation in Discovery.
About Ozen Engineering:
Ozen Engineer...
>
EMA3D Shielding Effectiveness of a Box Demo (5/6): Meshing and Model Execution
Jun 24, 2023 - Hi there! This tutorial demonstrates the Ansys EMA3D Cable workflow for a high intensity radiated field (HIRF) simulation in Discovery.
About Ozen Engineering:
Ozen Engineeri...
>
EMA3D Shielding Effectiveness of a Box Demo (4/6): Field Probe Creation
Jun 24, 2023 - Hi there! This tutorial demonstrates the Ansys EMA3D Cable workflow for a high intensity radiated field (HIRF) simulation in Discovery.
At Ozen Engineering Inc. (https://www.OzenI...
>
EMA3D Shielding Effectiveness of a Box Demo (3/6): Material Properties Definition
Jun 24, 2023 - Hi there! This tutorial demonstrates the Ansys EMA3D Cable workflow for a high intensity radiated field (HIRF) simulation in Discovery.
About Ozen Engineering:
Ozen Engineeri...
>
EMA3D Shielding Effectiveness of a Box Demo (2/6): Plane Wave Source Definition
Jun 24, 2023 - Hi there! This tutorial demonstrates the Ansys EMA3D Cable workflow for a high intensity radiated field (HIRF) simulation in Discovery.
About Ozen Engineering:
Ozen Engineeri...
>
EMA3D Shielding Effectiveness of a Box Demo (1/6): Introduction and Simulation Domain Definition
Jun 23, 2023 - Hi there! This tutorial demonstrates the Ansys EMA3D Cable workflow for a high intensity radiated field (HIRF) simulation in Discovery.
About Ozen Engineering:
Ozen Engineeri...
>
SIwave: Unleash the power of the PI solver (SD)
Jun 14, 2023 - This short video shows the many things that a user will get from using the PI solver inside SIwave: S-parameters and how to read them, normalization for correct crosstalk readings,...
>
SIwave: Unleash the power of the DC IR solver (SD)
Jun 14, 2023 - This short video shows the many things that a user will get from using the DC solver inside SIwave: Voltage drop in Vcc, Voltage rise in the GND, current distribution, locating hig...
>
SIwave in 2 Minutes: Modify a plane geometry
Jun 7, 2023 - This short video shows how to modify a trace: add/remove more sides, modify the vertices, and change sides to arcs.
About Ozen Engineering:
Ozen Engineering is a leading prov...
>
SIwave in 2 Minutes: Modify a trace geometry
Jun 6, 2023 - This short video shows how to modify a trace: add/remove more sides and/or modify the vertices.
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys soluti...
>
SIwave in 2 Minutes: Add a new trace
Jun 6, 2023 - This short video shows how to add a new trace in SIwave. The process will generate a new net.
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys solution...
>
SIwave: Unleash the power of the DC IR solver
Jun 2, 2023 - This short video shows the many things that a user will get from using the DC solver inside SIwave: Voltage drop in Vcc, Voltage rise in the GND, current distribution, locating hig...
>
How to plot E,H, and other fields in Q3D.
Jun 1, 2023 - Hi there! This video shows how to plot E, H and other fields on Q3D. The application does not let user to do that directly, hence we provide the work around for it.
About Ozen En...
>
How Medical Implants are Designed using Ansys Mechanical
May 30, 2023 - Read the Ansys Case Study: https://blog.ozeninc.com/resources/revolutionizing-patient-specific-implants-the-mecuris-success-story
Learn how Ansys Mechanical is used to advance th...
>
How to model surface coating stress in Ansys Mechanical
May 24, 2023 - The problem of very thin surface coatings causing deformation through residual stress comes up pretty often. These can be super thin coatings often deposited at high temperatures. ...
>
SIwave in 2 Minutes: Selecting & Hiding Nets
May 23, 2023 - Learn how to selectively show or hide specific nets in SIwave for visualization and analysis purposes.
"Nets" are interconnected conductive paths or signal paths in a circuit. A n...
>
2mins SIwave: Smart selection of nets
May 19, 2023 - This short video shows how to save selections in a stack for a future use. Then the user will not have to look for the nets again.
About Ozen Engineering:
Ozen Engineering is...
>
2mins SIwave: Modify the shape of a pad using the padstacks editor
May 17, 2023 - This short video shows how to modify the shape of a pad using padstacks editor. If the pad is a polygon or a oblong, you can modify the points.
About Ozen Engineering:
Ozen E...
>
2mins SIwave: Assign Voltage/current ports manually
May 16, 2023 - This short video shows how to add a voltage source or a current source in a random place in the board.
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys...
>
Ansys HFSS/Circuit : PCIe template
May 12, 2023 - This video is a short tutorial on using the PCIe template developed by the Ozen engineering team. The template has all the different standards, from PCIe 1.0 to PCIe 7.0
About Oze...
>
2mins SIwave: Select vias of a padstack model
May 12, 2023 - This short video shows how to identify the location of all vias that belongs to a padstack model.
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys solu...
>
2mins SIwave: Select small nets
May 12, 2023 - This short video shows how to identify the location of small nets (area small than a number)
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys solutions...
>
2mins SIwave: Moving Nets
May 12, 2023 - This short video shows how to modify the location of a net (dx, dy).
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys solutions, catering to a diverse ...
>
ANSYS HFSS: Optimize Substrate-Integrated Waveguide Techniques for Sensing Applications
May 10, 2023 - ANSYS HFSS is a powerful electromagnetic simulation software that can be used for designing and analyzing SIW (Substrate Integrated Waveguide) techniques for microfluidic biosensor...
>
2mins SIwave: Changing the trace cross-section shape
May 5, 2023 - This short video shows how to modify the shape of the traces from rectangular to trapezoidal or hexagonal.
About Ozen Engineering:
Ozen Engineering is a leading provider of A...
>
2mins SIwave: Hiding Components
May 3, 2023 - This short video shows how to hide discrete components and RLC components in SIwave
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys solutions, caterin...
>
2mins SIwave: Add ports
May 3, 2023 - This short video shows how to add ports at a random location in the board.
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys solutions, catering to a di...
>
2mins SIwave: Add circuit elements R, L or C
May 3, 2023 - This short video shows how to add R, L or C anywhere on the top or bottom layer.
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys solutions, catering t...
>
2mins SIwave: Add/Modify nets
May 3, 2023 - This short video shows how to add new nets and how to modify existing nets.
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys solutions, catering to a d...
>
2mins SIwave: Assign Surface Roughness
May 3, 2023 - This short video shows how to assign surface roughness to all or some of the signal layers. You can assign to top, bottom and side surfaces.
About Ozen Engineering:
Ozen Engi...
>
RLCG calculation for a Return Path using Q3D Matrix reduction
May 2, 2023 - Hi there! This video shows how to calculate RLCG parameter of three leads when they are connected together.
About Ozen Engineering:
Ozen Engineering is a leading provider of...
>
Inductance Computed with Flux Linkage and Current - Ansys Maxwell Magnetic Transient
Apr 27, 2023 - Hello, LF Electromagnetic Fans:
In this video I show you how to compute the apparent inductance and incremental inductance in an operation region before the knee of the magnetizin...
>
2mins SIwave: Assign vendor models to components
Apr 26, 2023 - This short video shows how to assign vendor model to components in SIwave.
About Ozen Engineering:
Ozen Engineering is a leading provider of Ansys solutions, catering to a di...
>
Immersion Cooling - Ansys Fluent
Apr 26, 2023 - In this video, we explore the capabilities of Ansys Fluent's immersion cooling feature. We demonstrate how to set up an immersion cooling simulation in Ansys Fluent. From cooling e...
>
Laser powder bed fusion distortion simulation in Ansys Mechanical
Apr 25, 2023 - Ansys has a host of easy to use wizard for setting up metal 3d printing process simulations. These allow you to model the distortion and compensations needed to ensure the right pa...
>
RLCG calculation for Parallel Leads using Q3D Matrix reduction.
Apr 25, 2023 - Hi there! This video shows how to calculate RLCG parameter of three leads when they are connected together.
About Ozen Engineering:
Ozen Engineering is a leading provider of...
>
Hot Isostatic Press forming simulation in Ansys Mechanical
Apr 22, 2023 - Hot isostatic press is a popular metal forming process. Simulating it accurately requires a coupled thermal mechanical solver with the ability to handle porosity and metal plastici...
>
Montecarlo Radiation Model Setup in Ansys Fluent
Apr 22, 2023 - This video showcases the power and versatility of Ansys Fluent's Monte Carlo radiation modeling capabilities. We walk you through setting up a Monte Carlo radiation simulation in A...
>
How to setup natural convection problems in Ansys Icepak
Apr 21, 2023 - In this video the best practices for defining a natural convection problem are discussed. An electronics cooling problem with failed fans is used as an example.
About Ozen Enginee...
>
Installation of Ansys temporary license
Apr 4, 2023 - Congratulations on getting approved for your Ansys temporary license.
This video will walk you through what you need to do next.
About Ozen Engineering:
Ozen Engineering is a...
>
BP Filter Design Using Synmatrix and HFSS Integrated Workflow: Part 1
Apr 3, 2023 - Hi there! In this video we are going to demonstrate designing a bandpass filter using Synmatrix/HFSS integrated workflow.
About Ozen Engineering:
Ozen Engineering is a leadin...
>
Medical implant fatigue simulation using Ansys Mechanical
Apr 1, 2023 - This is a demonstration of a Dental Implant according to ISO14801. However the methodology is widely applicable to most implant testing simulations. The goal is to ensure the devic...
>
How to compare two different CFD solutions in Ansys CFD?
Mar 30, 2023 - The 3-min video below shows how to compare two different CFD solutions in Ansys CFD Post. Ansys CFD Post offers a very quick and convenient way to compare two different CFD solutio...
>
Cable Simulation using Ansys 2D Extractor and Simplorer
Mar 25, 2023 - Hi there! This video shows how to simulate the distributed parameters of a cable using Ansys 2D Extractor and dynamically link the cable design into an Ansys Simplorer circuit simu...
>
Ansys Speos: Light guide demo
Mar 23, 2023 - In this video, Ozen Engineering optical experts demonstrate how to design an effective light guide using Ansys Speos. Light guides are used create beautiful illuminated spaces.
>
Ansys Lumerical: Multilevel Diffractive Lenses Design Part1
Mar 23, 2023 - This this video, Ozen Engineering photonics expert discuss how photonics simulation can be used to help design effective multilevel diffractive lenses. These lenses can be made ver...
>
How to set arbitrary backdrill depth in HFSS 3D Layout
Mar 21, 2023 - Hi there! In this video we are going to show you how to set arbitrary backdrill depth in HFSS 3D Layout (23R1). Previously, defining the backdrill in HFSS 3D Layout involved assign...
>
UDF to define temperature-dependent properties - Ansys Fluent
Mar 20, 2023 - In this video, we will show you how to create a UDF to define temperature-dependent properties in Ansys Fluent.
>
Creating a Fan Internal Boundary Condition in Ansys Fluent
Mar 17, 2023 - This 7-min video describes how to create an internal fan boundary condition within an Ansys Fluent model. First the geometry is created and boundaries are tagged in SpaceClaim. The...
>
Using Q3D Extractor (Ansys) to Calculate Die Leads’ AC and DC R(resistance) and L(inductance)
Mar 15, 2023 - Hi there! In this video we are going to show how to use Q3D Extractor by Ansys to analyze ACR, ACL. DCR, DCL of a die. Die geometry is made , source and sinks added and then result...
>
Ansys Maxwell Electronics Transformer ACT
Mar 11, 2023 - Hello, Transformer Fans:
In this video I describe how to use the Ansys Electronic Transformer ACT to automatically create a 3D FEM model of an electronic transformer or inductor i...
>
Control panel lighting simulation - Ansys Speos Demo
Mar 8, 2023 - Light up control panels are very where and proper lighting is very important in the perceived quality of many products. In addition there maybe night vision requirements for certai...
>
How to solve HPC Pack / Pool licensing error in Ansys Electronics Desktop
Mar 7, 2023 - Hi there! This video shows how to solve a common HPC licensing error message in the Ansys Electronics Desktop regarding not enough HPC Parallel Licenses. The solution is to change ...
>
Electromigration: Theory and Simulation
Mar 4, 2023 - Electromigration is most significant in applications where current densities are high, such as in microelectronics or semiconductors. In this video we'll discuss when and how elect...
>
Ansys Fluent GPU speed test - full demo
Feb 21, 2023 - You've probably seen lots of amazing speedup graphs. You maybe a little doubtful on if it is "REALLY" that great! In this video I run through a speed comparison of the new Ansys Fl...
>
Ansys Fluent GPU solver speed test
Feb 21, 2023 - Ansys Fluent has a new native GPU solver. In this video I show a speed test of GPU solver vs 12 core CPU on a pretty standard industry sized CFD problem. The results are AMAZING!
>
Material Processing Workspace in Ansys Fluent
Feb 16, 2023 - This video contains a step-by-step workflow to set up a direct extrusion model in Ansys Fluent. The model involves a high viscous material deforming during extrusion process. The a...
>
PExprt (Power Electronics Expert) Overview - Jan 29 2023
Feb 4, 2023 - Hello, Power Electronics Transformer fans:
This is an overview of how to use PExprt to analyze and optimize magnetic components such as transformers and inductors using industry b...
>
Signal Integrity 802.3ck VSR SERDES Lines
Feb 2, 2023 - Pluggable transceivers are essential components for data centers and long-haul communications. This presentation focuses on SERDES lines, which are the transceiver's RF input/outpu...
>
How to import an HFSS 3D Layout model as a component into HFSS 3D environment and enable Mesh Fusion
Jan 27, 2023 - Hi there! In this video we are going to show you how to import an HFSS 3D Layout model as a component into HFSS 3D environment and enable Mesh Fusion
https://blog.ozeninc.com/reso...
>
Photonic modulator design and simulation using Ansys Lumerical
Dec 6, 2022 - Optical modulators are important components of optical transceivers and optical communications equipment. In this video we discuss and demonstrate how to use Lumerical to improve t...
>
Electro Absorption Photonic Modulator Design and Simulation (Part3- Lumerical Charge)
Dec 1, 2022 - Hey guys! In this video, I'm continuing my series on photonic modulator design and simulation. This time, I'll be using the Lumerical Charge software to create our modulator. Stay ...
>
Electro Absorption Photonic Modulator Design and Simulation (Part2- Lumerical Mode)
Nov 22, 2022 - Hey guys! In this video, I'm continuing my series on photonic modulator design and simulation. This time, I'll be using the Lumerical Mode software to create our modulator. Stay tu...
>
Electro Absorption Photonic Modulator Design and Simulation (Part1- theory)
Nov 12, 2022 - Follow these series of videos if you are interested in simulated electro absorption modulators. The mode effective index and overlap with the active region will be calculated. The ...
>
Connecting to your Ansys license server
Nov 5, 2022 - Connecting your computer to your Ansys license server is pretty simple.
In this video we demonstrate how to connect Ansys Mechanica/CFD and Ansys electronics desktop to your Ansys ...
>
Ansys license manager installation - Demonstration
Nov 5, 2022 - Many new Ansys customers have trouble with the Ansys license manager installation. Here is a video that walks you through the process. Starting with license email from Ansys all th...
>
Solar cells simulation using Lumerical tools (Part5- Lumerical Charge-(I_SC, V_OC, FF, Efficiency))
Nov 4, 2022 - Have questions? Ask us live at our live demo and Q&A about Ansys Lumerical on Aug. 23rd: https://www.ansys.com/events/optimizing-solar-panel-performance-through-photonic-modeling?...
>
Solar cells simulation using Lumerical tools (Part4- Lumerical Charge-setting)
Nov 4, 2022 - ? Have questions about Ansys Lumerical? Ask us at our live demo and Q&A on Aug. 23rd!
Register: https://www.ansys.com/events/optimizing-solar-panel-performance-through-photonic-mod...
>
Immersed body valve simulation using Ansys CFD: Part3
Nov 2, 2022 - This 3rd part of the immersed body valve simulation show the 6dof capabilities of this method. With 6dof we calculate the fluid dynamics force and combine it with any number of add...
>
Immersed body valve simulation using Ansys CFD: Part2
Nov 2, 2022 - In this part 2 of the immersed body simulation we move the valve in a transient analysis. This shows how easy and stable valve motion is with immersed body analysis.
>
Immersed body valve simulation using Ansys CFD: Part1
Nov 2, 2022 - Valve simulation using immersed body in Ansys CFD. Immersed body is a very fast and simple way to model move parts in CFD. It is very robust and reliable with some trade off in acc...
>
Valve pressure vs flow analysis in Ansys CFD
Nov 2, 2022 - In this video we show the basics of setting up a valve simulation.
Basic analysis for valves allows engineers to determine the flow rate vs pressure drop at different close rates.
>
Solar cells simulation using Lumerical tools (Part3- Lumerical Heat)
Oct 28, 2022 - Considering Ansys Lumerical for your projects? ?
See it in action at our live demo and Q&A on Aug. 23rd: https://www.ansys.com/events/optimizing-solar-panel-performance-through-pho...
>
Solar cells simulation using Lumerical tools (Part2- Lumerical FDTD)
Oct 25, 2022 - ? Have questions about Ansys Lumerical? ? Join our live demo and Q&A on Aug. 23rd!
Register here: https://www.ansys.com/events/optimizing-solar-panel-performance-through-photonic-m...
>
Solar cells simulation - (Part1- Theory)
Oct 25, 2022 - ? Got questions about Ansys Lumerical? ? Join our live demo and Q&A on Aug. 23rd! - https://www.ansys.com/events/optimizing-solar-panel-performance-through-photonic-modeling?utm_ca...
>
Introducing the course: Designing passive photonics components with Lumerical tools (6 hours)
Oct 13, 2022 - This course will teach you how to design photonic integrated circuit components (Passive):
#Lumerical tools #Simulation #beam splitter #Y-branch#interferometer#Lumerical FDTD
#Py...
>
Introduction to silicon photonic devices (Part2).
Sep 30, 2022 - The purpose of this part of presentation is to provide main component of Silicon Photonics
1-Waveguide
2-Photonic crystal waveguide
3- Four wave mixing
4- Passive component
5- Co...
>
Introduction to silicon photonic (Part1).
Sep 30, 2022 - The purpose of this part of presentation is to provide you with an overview of Silicon photonics
1-Why Silicon Photonics
2- The Silicon Photonics Advantage
3- Roadmap of Silicon...
>
Simulating shock and vibrations in Ansys - Random Vibrations
Sep 24, 2022 - This was a webinar conducted by the Ozen engineering team discuss the basics of linear dynamics simulations in Ansys. This 4th video of the series covers Random Vibrations analysis...
>
Simulating shock and vibrations in Ansys - Response spectrum
Sep 24, 2022 - This was a webinar conducted by the Ozen engineering team discuss the basics of linear dynamics simulations in Ansys. This 3rd video of the series covers response spectrum analysis...
>
Simulating shock and vibrations in Ansys - Harmonic analysis
Sep 24, 2022 - This was a webinar conducted by the Ozen engineering team discuss the basics of linear dynamics simulations in Ansys. This 2nd video of the series covers Harmonic analysis, this me...
>
Simulating shock and vibrations in Ansys - Modal analysis
Sep 24, 2022 - This was a webinar conducted by the Ozen engineering team discuss the basics of linear dynamics simulations in Ansys. This 1st video of the series covers Modal analysis, the first ...
>
From a photonic crystal fiber to a free space and vice versa: the coupling workflow-Lumerical-Zemax
Sep 5, 2022 - The Lumerical Mode will be used for simulating photonic crystal fibers, while the Zemax will be used for simulating ray tracing.
#Ozen #Lumerical#Zemax#Photonic crystal fiber#Dispe...
>
EMI/EMC Simulation Part 2: PCB EMI demo
Sep 3, 2022 - EMI/EMC simulation can be very complex. However we can often investigate specific parts to address any potential EMI issues. In this video we demonstrate how we analyze a PCB to in...
>
EMI/EMC Part 1: Intro to EMI/EMC Simulation
Sep 3, 2022 - EMI/EMC simulations can be very complex.
In this video we discuss how to go about breaking the problem down and understanding the tools available to address EMI/EMC challenges thro...
>
How to transfer a .res file from CFX to Ensight (Transient Solution)?
Aug 18, 2022 - This video shows you how to translate a .res file from CFX into an Ensight Case file format for post-processing purposes.
