Posts

ASME Georgia Southern University Seminar Banner

3D Modeling + Simulation with Ansys

ASME Georgia Southern University Seminar Banner

As a recognized thought leader in the areas of 3D modeling and engineering simulations, our own Dr. Metin Ozen has been asked to speak at an upcoming online event sponsored by Georgia Southern University and ASME.

Feel free to join in on September 7 at 2:00 PM PT and learn from Dr. Ozen’s informative lesson.

Zoom meeting link

 

Digital Twin and Battery Design

Article: Digital Twin Prevents Drain on Battery Pack Simulation Time

Two of the current engineering trends that Ozen Engineering focuses on and helps customers realize their goals are:

  • Digital Twin
  • Battery Design

A recent article in the Ansys Advantage Magazine discusses both of these issues. To learn more, please click on the link below to view the article.

Digital Twin Prevents Drain on Battery Pack Simulation Time

If you are considering adding Digital Twin models to your existing engineering and system monitoring toolbox, Ozen Engineering can help you through process.

Similarly, if you involved with battery design, Ozen Engineering can help you simulate and improve your designs.

Contact us today to get started on your Digital Twin and/or battery simulation model.

ANSYS Fluent/CFX Fluid Structure Interaction (FSI) with ANSYS Mechanical

We're sorry, but all tickets sales have ended because the event is expired.

  • September 30, 2021 - October 1, 2021
    9:00 am - 5:00 pm

Overview The ANSYS Fluent/CFX FSI course is a two-day advanced course covering modeling approaches for fluid-structure interaction applications using ANSYS Fluent/CFX and ANSYS Mechanical. The course will cover setup, solution and convergence of one-way and two-way FSI simulations, as well as static (1-way) data transfers. Course Topics: Overview of FSI in ANSYS Workbench Moving Mesh (more…)

ANSYS Mechanical Material Nonlinearities

We're sorry, but all tickets sales have ended because the event is expired.

  • September 14, 2021 - September 15, 2021
    9:00 am - 5:00 pm

Overview Intended to be taken after the introductory Mechanical nonlinearities class, this 2-day course covers advanced nonlinear material options including advanced metal plasticity, viscoplasticity, viscoelasticity, creep and hyperelasticity. Course Topics: Advanced Metal Plasticity Viscoplasticity Creep Hyperelasticity Viscoelasticity Advanced Material Options Prerequisites Completion of the ANSYS Mechanical Basic Structural Nonlinearities course is required. Target Audience: Engineers and Designers (more…)

ANSYS Fluent Heat Transfer Modeling

We're sorry, but all tickets sales have ended because the event is expired.

  • July 29, 2021
    8:00 am - 4:00 pm

Overview This course is designed for existing users of ANSYS Fluent. You will learn and achieve an understanding of the basic theory of the models and computational methods for heat transfer applications. The knowledge gained will enable you to select the most appropriate modelling approaches for your target applications and simulation objectives. Prerequisites A technical (more…)

Events

ANSYS CFD Quickstart

We're sorry, but all tickets sales have ended because the event is expired.

  • December 18, 2014
    2:00 am - 4:00 am
  • January 23, 2018
    9:00 am - 5:00 pm
  • February 16, 2018
    9:00 am - 5:00 pm
  • March 16, 2018
    8:00 am - 4:00 pm
  • April 12, 2018
    8:00 am - 4:00 pm
  • May 31, 2018
    8:00 am - 4:00 pm
  • June 22, 2018
    8:00 am - 4:00 pm
  • July 20, 2018
    8:00 am - 4:00 pm
  • August 9, 2018
    8:00 am - 4:00 pm
  • September 21, 2018
    8:00 am - 4:00 pm
  • October 12, 2018
    8:00 am - 4:00 pm
  • November 8, 2018
    9:00 am - 5:00 pm
  • December 7, 2018
    9:00 am - 5:00 pm

Overview ANSYS CFD (Fluent and CFX) software contains the broad physical modeling capabilities needed to model flow, turbulence, heat transfer, and reactions for industrial applications ranging from air flow over an aircraft wing to combustion in a furnace, from bubble columns to oil platforms, from blood flow to semiconductor manufacturing, and from clean room design (more…)

Introduction to Orthopedic Implant Simulation

We're sorry, but all tickets sales have ended because the event is expired.

  • August 25, 2016 - August 26, 2016
    8:00 am - 4:00 pm
  • August 10, 2018
    8:00 am - 4:00 pm

Overview This class covers Musculoskeletal Simulation Finite Element Analysis Overview CT (Computed Tomography) => Using Scan Data to get Geometry and Material Properties Coupling Musculoskeletal Models to FEA Implants Trauma (Fixed Plate, Fracture Fixation, etc.) Orthopedic Joint Implants (Hip, Knee, Shoulder, etc.) Fatigue, Fracture, Reliability Implant Optimization The course also includes relevant “hands-on” workshops and (more…)

ANSYS Mechanical Basic Structural Nonlinearities


  • November 16, 2021 - November 17, 2021
    9:00 am - 5:00 pm

Overview ANSYS Mechanical Basic Structural Nonlinearities is a 2-day training course for engineers that need to perform structural nonlinear analyses using the ANSYS Mechanical. Course Topics :  Structural Nonlinearities Advanced Contact Metal Plasticity Hyperelasticity Prerequisites Completion of Introduction to ANSYS Workbench for Mechanical is strongly advised. Target Audience: Engineers and Designers Teaching Method: Lectures and computer (more…)

ANSYS Mechanical Advanced Connections

We're sorry, but all tickets sales have ended because the event is expired.

  • June 15, 2017 - June 16, 2017
    8:00 am - 4:00 pm
  • April 2, 2019 - April 3, 2019
    8:00 am - 4:00 pm
  • March 31, 2020 - April 1, 2020
    8:00 am - 4:00 pm

Overview ANSYS Mechanical is an intuitive mechanical analysis tool that offers a rich library of Connection Technology options to simulate many different contact behaviors between faces and edges of solid and surface bodies (meshed with shell elements). There are a variety of advanced options available for dealing with a broad variety of issues at contact (more…)

ANSYS Mechanical Material Nonlinearities

We're sorry, but all tickets sales have ended because the event is expired.

  • June 20, 2017 - June 21, 2017
    8:00 am - 4:00 pm
  • September 17, 2019 - September 18, 2019
    8:00 am - 4:00 pm
  • September 15, 2020 - September 16, 2020
    8:00 am - 4:00 pm

Overview Intended to be taken after the introductory Mechanical nonlinearities class, this 2-day course covers advanced nonlinear material options including advanced metal plasticity, viscoplasticity, viscoelasticity, creep and hyperelasticity. Course Description This training course teaches students how to effectively use ANSYS Mechanical to analyze structural problems involving nonlinear materials. Course Topics Include: Advanced Metal Plasticity Viscoplasticity Creep (more…)