Posts

ANSYS Electromagnetics Quickstart


  • March 13, 2018
    9:00 am - 5:00 pm
  • April 27, 2018
    9:00 am - 5:00 pm
  • June 1, 2018
    9:00 am - 5:00 pm
  • July 27, 2018
    9:00 am - 5:00 pm
  • August 31, 2018
    9:00 am - 5:00 pm
  • September 28, 2018
    9:00 am - 5:00 pm

Overview This course presents the most essential concepts from Introduction to ANSYS Maxwell & Introduction to ANSYS HFSS in a single day. It is intended for users who have little or no experience with ANSYS Electromagetic products and must come up to speed very quickly on the most basic capabilities. Prerequisites A general knowledge of electromagnetic phenomena is (more…)

Installed Antenna Performance Modeling on Electrically Large Platforms

Savant provides highly efficient EM analysis of antennas on electrically large platforms. Using the Shooting and Bouncing Rays (SBR) technique, Savant yields full antenna scattering prediction for geometries that are thousands of wavelengths in size, computing:

  • Far-field radiation patterns
  • Near-field distributions
  • Antenna-to-antenna coupling

Savant picks up where full-wave solvers leave off , solving electrically large problems efficiently and accurately.

 

 

 

 

 

 

 

Please register for Ozen Engineering’s Savant Webinar on Feb 8, 2018 11:00 AM PST at:
https://attendee.gotowebinar.com/register/4167307786785751299
After registering, you will receive a confirmation email containing information about joining the webinar.

Subscribe to Newsletter

  • This field is for validation purposes and should be left unchanged.

Introduction to ANSYS Maxwell


  • April 28, 2020 - April 29, 2020
    9:00 am - 5:00 pm
  • June 16, 2020 - June 17, 2020
    9:00 am - 5:00 pm
  • July 28, 2020 - July 29, 2020
    9:00 am - 5:00 pm
  • October 20, 2020 - October 21, 2020
    9:00 am - 5:00 pm
  • December 15, 2020 - December 16, 2020
    9:00 am - 5:00 pm
  • February 26, 2020 - February 27, 2020
    9:00 am - 5:00 pm

Overview ANSYS Maxwell provides solutions for many types of analyses including DC conduction, frequency domain, time domain, electrostaticand optimization studies. It is an intuitive mechanical analysis tool that allows creating or importing the geometry from a number of different CAD systems. It can be used to verify product performance and integrity from the concept phase through (more…)

Introduction to ANSYS Icepak


  • March 17, 2020 - March 19, 2020
    9:00 am - 5:00 pm
  • June 23, 2020 - June 25, 2020
    9:00 am - 5:00 pm
  • September 22, 2020 - September 24, 2020
    9:00 am - 5:00 pm

  Overview ANSYS Icepak provides flow and thermal management solutions for many types of electronic design applications. The primary goal of this course is to cover the basics of working in the ANSYS Icepak user environment. Students will be introduced to the world of electronics thermal modelling through a combination of lectures, workshops and examples/demonstrations. (more…)

Introduction to ANSYS HFSS


  • July 21, 2020
    9:00 am - 5:00 pm
  • September 11, 2020
    9:00 am - 5:00 pm
  • November 6, 2020
    9:00 am - 5:00 pm
  • February 7, 2020
    9:00 am - 5:00 pm

Overview This one-day course uses examples and exercises to provide a comprehensive understanding of HFSS, intended for people who have had little or no experience with ANSYS HFSS. The ANSYS HFSS course will teach the students how to design and analyze high-frequency electronic components such as antennas, RF/microwave components, and biomedical devices. The course will (more…)

Events

Introduction to ANSYS HFSS

Overview

This one-day course uses examples and exercises to provide a comprehensive understanding of HFSS, intended for people who have had little or no experience with ANSYS HFSS. The ANSYS HFSS course will teach the students how to design and analyze high-frequency electronic components such as antennas, RF/microwave components, and biomedical devices. The course will teach students how to effectively use ANSYS HFSS to setup, solve and post-process the results from high frequency electromagnetic simulations.

The course also includes relevant “hands-on” workshops and exercises.

Prerequisites

  • A technical education and/or background in high frequency electromagnetics is recommended but having an engineering degree is not required.
  • It is also strongly recommended, but not required, that you are familiar with the Getting Started Guides provided with the software.

Target Audience: Engineers and Designers

Teaching Method: Lectures and computer practical sessions to validate acquired knowledge. A training certificate is provided to all attendees who complete the course.

Typical Agenda

9:00AM – Class Begins

12- 1:00PM – Lunch Served

5:00PM – Class Ends

Cost: $600/day

ANSYS Electromagnetics Quickstart


  • March 13, 2018
    9:00 am - 5:00 pm
  • April 27, 2018
    9:00 am - 5:00 pm
  • June 1, 2018
    9:00 am - 5:00 pm
  • July 27, 2018
    9:00 am - 5:00 pm
  • August 31, 2018
    9:00 am - 5:00 pm
  • September 28, 2018
    9:00 am - 5:00 pm

Overview This course presents the most essential concepts from Introduction to ANSYS Maxwell & Introduction to ANSYS HFSS in a single day. It is intended for users who have little or no experience with ANSYS Electromagetic products and must come up to speed very quickly on the most basic capabilities. Prerequisites A general knowledge of electromagnetic phenomena is (more…)

Electromigration Simulation in ANSYS


  • January 31, 2020
    9:00 am - 5:00 pm

Overview This class will demonstrate how ANSYS/Mechanical can be used in modeling a complex phenomenon like electromigration taking into account electrical field forces, thermal gradients, stress gradients, and atomic concentration gradient. Electromigration is a physical phenomenon of mass transport caused by the gradual movement of the ions in a conductor due to momentum transfer between conducting (more…)

ANSYS HFSS 3D Layout


  • July 17, 2020
    9:00 am - 5:00 pm

Overview The ANSYS HFSS 3D Layout course for high-speed printed circuit board design focuses on layered structures using the 3D Layout design type in HFSS and AEDT (ANSYS Electronic Desktop). Designed for brand new users, this course covers layer stack-up, layout viewing, choices of solvers, ports, pad-stacks, and hierarchy. Workshops include small differential via structures, (more…)

ANSYS HFSS for Signal Integrity


  • June 5, 2020
    9:00 am - 5:00 pm
  • October 16, 2020
    9:00 am - 5:00 pm

Overview This one-day course uses examples and real design exercises to provide a comprehensive understanding of ANSYS HFSS with the specific emphasis on Signal Integrity. The course is intended for beginner users and assumes some prior knowledge of HFSS. This class covers using the HFSS Desktop features, creating and manipulating parametric 3D models, and working (more…)