Posts

ASME Georgia Southern University Seminar Banner

3D Modeling + Simulation with Ansys

ASME Georgia Southern University Seminar Banner

As a recognized thought leader in the areas of 3D modeling and engineering simulations, our own Dr. Metin Ozen has been asked to speak at an upcoming online event sponsored by Georgia Southern University and ASME.

Feel free to join in on September 7 at 2:00 PM PT and learn from Dr. Ozen’s informative lesson.

Zoom meeting link

 

Newsletter: What If Your Design Could Be Better? – Parametric Optimization

Read about the latest news from Ozen Engineering and Ansys, Inc.

April 7, 2021

Click here to view the PDF

ANSYS Fluent/CFX Fluid Structure Interaction (FSI) with ANSYS Mechanical

We're sorry, but all tickets sales have ended because the event is expired.

  • September 30, 2021 - October 1, 2021
    9:00 am - 5:00 pm

Overview The ANSYS Fluent/CFX FSI course is a two-day advanced course covering modeling approaches for fluid-structure interaction applications using ANSYS Fluent/CFX and ANSYS Mechanical. The course will cover setup, solution and convergence of one-way and two-way FSI simulations, as well as static (1-way) data transfers. Course Topics: Overview of FSI in ANSYS Workbench Moving Mesh (more…)

ANSYS Explicit Dynamics

We're sorry, but all tickets sales have ended because the event is expired.

  • September 28, 2021 - September 29, 2021
    9:00 am - 5:00 pm

Overview This course will enable you to develop the basic skills necessary to implement complete Explicit Dynamics solution procedures in ANSYS Mechanical. Efficiently simulate the dynamic response of highly transient, highly nonlinear physical phenomena like drop testing and high-speed impact. Prerequisites  A basic background in the following areas is also recommended: dynamics, mechanics of materials, (more…)

ANSYS Mechanical Material Nonlinearities

We're sorry, but all tickets sales have ended because the event is expired.

  • September 14, 2021 - September 15, 2021
    9:00 am - 5:00 pm

Overview Intended to be taken after the introductory Mechanical nonlinearities class, this 2-day course covers advanced nonlinear material options including advanced metal plasticity, viscoplasticity, viscoelasticity, creep and hyperelasticity. Course Topics: Advanced Metal Plasticity Viscoplasticity Creep Hyperelasticity Viscoelasticity Advanced Material Options Prerequisites Completion of the ANSYS Mechanical Basic Structural Nonlinearities course is required. Target Audience: Engineers and Designers (more…)

Events

ANSYS CFD Quickstart

We're sorry, but all tickets sales have ended because the event is expired.

  • December 18, 2014
    2:00 am - 4:00 am
  • January 23, 2018
    9:00 am - 5:00 pm
  • February 16, 2018
    9:00 am - 5:00 pm
  • March 16, 2018
    8:00 am - 4:00 pm
  • April 12, 2018
    8:00 am - 4:00 pm
  • May 31, 2018
    8:00 am - 4:00 pm
  • June 22, 2018
    8:00 am - 4:00 pm
  • July 20, 2018
    8:00 am - 4:00 pm
  • August 9, 2018
    8:00 am - 4:00 pm
  • September 21, 2018
    8:00 am - 4:00 pm
  • October 12, 2018
    8:00 am - 4:00 pm
  • November 8, 2018
    9:00 am - 5:00 pm
  • December 7, 2018
    9:00 am - 5:00 pm

Overview ANSYS CFD (Fluent and CFX) software contains the broad physical modeling capabilities needed to model flow, turbulence, heat transfer, and reactions for industrial applications ranging from air flow over an aircraft wing to combustion in a furnace, from bubble columns to oil platforms, from blood flow to semiconductor manufacturing, and from clean room design (more…)

Introduction to BGA-Solder Joint Reliability Simulation

We're sorry, but all tickets sales have ended because the event is expired.

  • August 26, 2015
    8:00 am - 4:00 pm
  • July 3, 2020
    8:00 am - 4:00 pm
  • July 5, 2019
    8:00 am - 4:00 pm

Overview In the design of Ball Grid Array (BGA) packaging design, solder joints are a frequent critical area. Learn how to improve the robustness and reliability of these parts using the capabilities of ANSYS multiphysics simulations. The topics covered in this course are: Fracture Mechanics Fatigue Creep versus Viscoplasticity Thermal Cyclic Modeling for the Calculation (more…)

Introduction to BGA-Solder Joint Reliability Simulation

We're sorry, but all tickets sales have ended because the event is expired.

  • August 26, 2015
    8:00 am - 4:00 pm
  • July 5, 2019
    8:00 am - 4:00 pm
  • July 6, 2021
    9:00 am - 5:00 pm

Overview In the design of Ball Grid Array (BGA) packaging design, solder joints are a frequent critical area. Learn how to improve the robustness and reliability of these parts using the capabilities of ANSYS multiphysics simulations. Course Topics: Fracture Mechanics Fatigue Creep versus Viscoplasticity Thermal Cyclic Modeling for the Calculation of Accumulated Fatigue Damage (Darveaux (more…)

Introduction to Orthopedic Implant Simulation

We're sorry, but all tickets sales have ended because the event is expired.

  • August 25, 2016 - August 26, 2016
    8:00 am - 4:00 pm
  • August 10, 2018
    8:00 am - 4:00 pm

Overview This class covers Musculoskeletal Simulation Finite Element Analysis Overview CT (Computed Tomography) => Using Scan Data to get Geometry and Material Properties Coupling Musculoskeletal Models to FEA Implants Trauma (Fixed Plate, Fracture Fixation, etc.) Orthopedic Joint Implants (Hip, Knee, Shoulder, etc.) Fatigue, Fracture, Reliability Implant Optimization The course also includes relevant “hands-on” workshops and (more…)

ANSYS Mechanical Basic Structural Nonlinearities


  • November 16, 2021 - November 17, 2021
    9:00 am - 5:00 pm

Overview ANSYS Mechanical Basic Structural Nonlinearities is a 2-day training course for engineers that need to perform structural nonlinear analyses using the ANSYS Mechanical. Course Topics :  Structural Nonlinearities Advanced Contact Metal Plasticity Hyperelasticity Prerequisites Completion of Introduction to ANSYS Workbench for Mechanical is strongly advised. Target Audience: Engineers and Designers Teaching Method: Lectures and computer (more…)