Electronics Capabilities

Power Integrity and Signal Integrity Analysis

Power and signal integrity (PI & SI) analysis products mitigate many electrical and thermal issues affecting printed circuit boards (PCBs): electromagnetic interference (EMI), crosstalk, power integrity, overheating, etc

Power Integrity and Signal Integrity Analysis

Electromagnetic Interference and Compatibility

Enables engineers to diagnose, isolate and eliminate EMI and radio-frequency issues (RFI) early in the design cycle. Advanced electromagnetic field solvers linked with power circuit simulators predict EMI/EMC performance and help avoid repetitive design iterations and costly recurrent EMC certification tests

Electromagnetic Interference and Compatibility

Wireless and RF

Allows engineers to design, simulate and validate the behavior of complex, high-performance RF, microwave and millimeter-wave devices in next generation wireless communication and defense systems

Wireless and RF

Thermal Management

Perform electronics cooling simulation and thermal analysis for chip-package, PCB and systems, as well as conduct thermomechanical stress analysis and airflow analysis to select the ideal heat sink or fan solution

Thermal Management

Electric Machine Analysis

Ansys electromechanical and power electronics simulation software is ideal for applications which depend on the robust integration of motors, sensors, and actuators with electronics controls.

Electric Machine Analysis

Electronics Reliability Simulation

Manage material information, optimize CAD geometries, perform complex multiphysics analysis, predict time-to-failure, and implement automation across the lifetime of your design.

Electronics Reliability Simulation

Electronics Products

Ansys HFSS

A 3D electromagnetic field solver to design high-frequency and high-speed electronic components. Its FEM, IE, asymptotic and hybrid solvers address RF, microwave, IC, PCB and EMI problems.

  • Solves multi-layer packages
  • 3D layout workflow for PCBs and packages
  • High-frequency electromagnetic solvers
  • IP protection through 3D components
Request Demo

Ansys Slwave

A specialized tool for simulating power and signal integrity as well as EMI analysis of IC/PCB packages. Solve for power delivery systems and high-speed channels in electronic devices.

  • Electrothermal and mechanical analysis
  • IBIS and IBIS-AMI SerDes analysis
  • Virtual compliance
  • Impedance, crosstalk and EMI scanning
  • Automated decoupling capacitor Optimization
Request Demo

Ansys Icepak

A computational fluid dynamics (CFD) solver for electronics thermal management. It predicts airflow, temperature and heat transfer in IC packages, PCBs, electronic assemblies, enclosures and power electronics.

  • Unstructured, body-fitted meshing
  • Built-in high-fidelity CFD solver
  • Comprehensive thermal reliability solution
  • Industry leading multiscale multiphysics
  • Board-level electrothermal coupling
  • Extensive libraries for thermal physics
Request Demo

Ansys EMA3D Cable

Ansys EMA3D Cable is a cable EMC modelling tool that specializes in analyzing lightning-induced electromagnetic (EM) effects on large platforms.

  • SpaceClaim’s Direct Modeler UI
  • Cable Cross-Sections Electrostatic Simulation
  • Streamiled Cable-ficused Workflow
  • Hybrid Transmission Line Harness
Request Demo

Ansys Maxwell

An electromagnetic field simulation solver for electric machines and electromechanical devices. Solve static, frequency-domain and time-varying electric fields.

  • 2D and 3D electromagnetic FEA
  • Component to system – Reduced-order modeling
  • Advanced electromagnetic material
  • Automatic adaptive meshing
  • Multiphysics analysis
  • Slice-only technology
Request Demo

Ansys Motor-CAD

A template-based design tool for multiphysics analyses of electric motors across the full torque-speed operating range to optimize EV performance, efficiency and size.

  • Intuitive, template-based setups
  • Built-in electromagnetic, thermal and mechanical solvers
  • Rapid analysis of efficiency maps, torque/speed characteristics and drive cycles
  • Thermal sizing of machines
Request Demo

Ansys Nuhertz FilterSolutions

Automated RF, microwave and digital filter design, synthesis and optimization in an efficient, straightforward process.

  • Automatic filter synthesis
    Embedded component databases
  • HFSS integration
  • Widest range of filter topologies
Request Demo

Ansys Q3D Extractor

Ansys Q3D Extractor calculates the parasitic parameter of frequency-dependent resistance, inductance, capacitance and conductance (RLCG) for electronic products.

  • Solid modeling
  • Power/signal integrity analysis
  • Various extraction types
  • Automatic, adaptive mesh refinement
Request Demo

Ansys Sherlock

Provides fast and accurate life predictions for electronic hardware at the component, board and system levels in early design stages to help future-proof your design.

  • Solder fatigue analysis
  • Translates ECAD to FEA/CFD in minutes
  • Turns stress (thermal, mechanical) into life prediction
  • Embedded, populated, modifiable libraries
  • Validated time-to-failure predictions
Request Demo

Ansys EMA3D Charge

3D modeling solution of charging, discharging and charge carrier transport across a wide range of applications, in one streamlined workflow.

  • SpaceClaim’s Direct Modeler UI
  • 3D Particle Transport
  • Surface and Internal Charging
  • ESDs in Air and Dielectrics
Request Demo

Related Articles

Using 3D Layout inside SIwave

Using 3D Layout inside SIwave

In SIwave many S-parameters solver. The 3D Layout uses the HFSS solver to solve all the PCB. It takes longer, but gives the most accurate results.
Read Article
SIwave: Optimize powerplanes using PI Advisor

SIwave: Optimize powerplanes using PI Advisor

How to activate and setup the PI advisor
Read Article
SIwave: PSI computer AC Currents

SIwave: PSI computer AC Currents

Display the AC current distribution. Similar to DCIR, but for AC currents. Good for studying High AC impedance along the powerplanes and RF lines.
Read Article
SIwave: PDN Channel Builder solver

SIwave: PDN Channel Builder solver

This blog describe the use of the PDN builder to calculate the response of PCB + Die
Read Article
RLCG parasitics extraction in SIwave

RLCG parasitics extraction in SIwave

SIwave can be used to extract the parasitic RLCG of any structure inside a PCB/package or die.
Read Article
Power/signal integrity (PSI) SYZ solver: More accurate 3D FEM solver in SIwave

Power/signal integrity (PSI) SYZ solver: More accurate 3D FEM solver in SIwave

SIwave includes a more advanced and accurate SYZ solver under the PSI category. This blog discusses how the PSI SYZ solver works and compares its results against the standard SYZ s...
Read Article
Electric Motor System Simulation: Part 1 – Dynamic Thermal ROM Creation with Ansys Icepak and Twin Builder

Electric Motor System Simulation: Part 1 – Dynamic Thermal ROM Creation with Ansys Icepak and Twin Builder

Learn how to turn Icepak CFD results into a dynamic ROM in Twin Builder to enable fast, accurate thermal simulations for electric motor system design.
Read Article
Designing a Non-Uniform Waveguide Power Divider Using AEDT HFSS and OptiSLang-Stochos (PI-BO)

Designing a Non-Uniform Waveguide Power Divider Using AEDT HFSS and OptiSLang-Stochos (PI-BO)

How to use Stochos to optimize a design in AEDT
Read Article
Embedded Element Pattern for Antenna Array Pattern Calculation

Embedded Element Pattern for Antenna Array Pattern Calculation

In this blog we will use the ANSYS HFSS tool to simulate the embedded antenna element radiation pattern based on unit cell analysis.
Read Article

Are you looking for an engineering simulation solution?

We provide expert electromagnetic simulation consulting, software, training, and support.

Ask The Experts