Videos

>

LiDAR Simulation Guide: Using ANSYS SPEOS for Best Results

Oct 16, 2024 - In this comprehensive LiDAR simulation tutorial, I walk you through setting up a rotating LiDAR system using ANSYS SPEOS 2024 R2. From defining geometry, sensor sources, and materi...

>

Simulating Light from Free Space to Nano-Scale: Dynamic Link Between Zemax & Lumerical-Part1

Oct 12, 2024 - In this video, I explore the dynamic integration between Zemax (ray optics) and Lumerical (wave optics) to simulate light propagation from free space to the nano-scale. This powerf...

>

Electrodynamic Force Calculation on Bus Bars using Maxwell

Oct 11, 2024 - Three-phase short circuit events are critical in electrical systems where an unintended connection between three phases leads to a significant surge of current. These events can ca...

>

Model Building Part 2 ECAD import NC Meshing - Ansys Icepak

Oct 10, 2024 - This video showcases the powerful Non-Conformal Meshing feature in Ansys Icepak, a game-changing capability that revolutionizes thermal simulation for electronic systems. Non-confo...

>

Model Building Part 2 ECAD import - Ansys Icepak

Oct 4, 2024 - Ansys Icepak’s ECAD import simplifies thermal analysis by allowing seamless integration of electronic designs directly from ECAD tools. It enables the import of PCB layouts and c...

>

ANSYS HFSS: Array Analysis Using The Array Factor Calculation

Oct 3, 2024 - Hi there! This video shows how to use the ANSYS HFSS built in array factor calculation method to compute antenna array radiation pattern for designs that have analyzed a single arr...

>

Description of laser propagation with ZBF file in Zemax

Sep 24, 2024 -

>

Vibrating Screen Simulation, Part I: Efficiency

Sep 19, 2024 - In this video, you’ll learn how to set up the model and calculate screen efficiency over time. Follow the procedure for your own geometry and operating conditions. In this demo, ...

>

Vibrating Screen Simulation, Part II: Optimization

Sep 19, 2024 - Building on the setup shown in the first video, OptiSLang is used to run the optimization with two input parameters. The screen efficiency is maximized, reaching 98%—a 31% improv...

>

MotorCAD: Skin and Proximity Effect losses in Stator Windings

Sep 13, 2024 - MotorCAD is capable of accurately solving full FEA AC conductor losses, considering the placement of the conductor within the slot. Both single-slot and multi-slot calculations are...

>

Ansys Maxwell: Core and Magnet Losses in Electric Motors

Sep 11, 2024 - Eddy current losses in magnets affect the efficiency and thermal performance of electric motors. They occur when alternating magnetic fields induce loops of electrical current with...

>

Dam Breakup Simulation Using Ansys Fluent

Sep 11, 2024 - The video walks through the details of VOF multiphase modeling starting from geometry generation with SpaceClaim, meshing, model and simulation setting, and finally post-processing...

>

Crash course: Induced voltage analysis using SIwave and AEDT Circuit.

Sep 2, 2024 - This short video shows how to do Induced voltage analysis for a PCB, for EMI susceptibility, in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading pro...

>

Crash course: FarField analysis using SIwave and AEDT Circuit.

Sep 2, 2024 - This short video shows how to do FarField analysis for a power planes and RF lines in a PCB, for EMI compliance, in less than 2 minutes. About Ozen Engineering: Ozen Engineer...

>

Crash course: NearField analysis using SIwave.

Sep 2, 2024 - This short video shows how to do Nearfield analysis for a power planes and RF lines in a PCB, to debug EMI, in less than 2 minutes. About Ozen Engineering: Ozen Engineering i...

>

Crash course: Frequency sweep analysis using SIwave and AEDT Circuit.

Sep 2, 2024 - This short video shows how to do frequency sweep analysis for a power planes and RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leadi...

>

Crash course: SIwizard analysis using SIwave and AEDT Circuit.

Sep 1, 2024 - This short video shows how to do SIwizard analysis of RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ansys solut...

>

Crash course: TDR analysis using SIwave and AEDT Circuit

Sep 1, 2024 - This short video shows how to do TDR analysis of RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ansys solutions,...

>

Crash course: Crosstalk scan using SIwave.

Sep 1, 2024 - This short video shows how to do Crosstalk scan of all the RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ansys ...

>

Crash course: Resonant modes using SIwave.

Sep 1, 2024 - This short video shows how to do Resonant modes of all the powerplanes in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ans...

>

Crash course: Zo scan using SIwave.

Sep 1, 2024 - This short video shows how to do Zo scan of all the RF lines in a PCB in less than 2 minutes. About Ozen Engineering: Ozen Engineering is a leading provider of Ansys solutio...

>

Flownex Video: Crude Oil Network in Flownex – Part 2

Aug 24, 2024 - Transient simulation in Flownex can be a valuable tool in oil pipeline simulation technology. It can be used to assess the impact of sudden changes in thermal crude oil boundary co...

>

Flownex Video: Crude Oil Network in Flownex – Part 1

Aug 24, 2024 - TThe oil and gas industry often utilizes pipeline simulation to simulate the movement of crude oil. To accurately predict the pipeline's flow rate, it's important to consider the t...

>

Aspherical Lens for Thin Laser Beam Uniformity

Aug 19, 2024 -

>

Optimetrics Setup in AEDT Icepak

Aug 16, 2024 - See how to setup parametric trials (sweeps) in Ansys AEDT Icepak

>

Manual powerplanes decoupling capacitors design using SIwave

Aug 16, 2024 - There are many techniques to determine the necessary decoupling caps for a PCB powerplane. In this video, we present a manual way to do the design, using one of the tools inside SI...

>

Surface Relief Grating Design for AR and HUDs

Aug 16, 2024 - In this video, we dive deep into the design and optimization of surface relief gratings using Lumerical, a powerful photonic simulation tool by Ansys. Whether you're working on aug...

>

Ansys Fluent Aeroacoustics

Aug 14, 2024 - Dive into Computational Fluid Dynamics (CFD) with our comprehensive guide to acoustics and the Ansys Fluent Aeroacoustics solver. This video, brought to you by Ozen Engineering, In...

>

Modeling Realistic Fans with Ansys Icepak

Aug 3, 2024 - Discover the power of advanced fan modeling in CFD simulations with our latest video on the Moving Reference Frame (MRF) approach in Ansys Icepak. We demonstrate how this method si...

>

Heat transfer in Flow Network in Flownex

Aug 1, 2024 - This video teaches you how to incorporate a heat transfer element into a flow network in Flownex. You'll also discover how to define the heat transfer mechanisms involved in the pr...

>

Flownex: Creating new fluid materials

Aug 1, 2024 - This video shows how to create a new fluid material for a flow network in Flownex that is not available in the Flownex library and how to use it in a problem.

>

Flownex: Flow Netwrok

Aug 1, 2024 - This video demonstrates how to create a flow network in Flownex, which includes pipes, nodes, and reservoirs. It explains how to define specifications for each flow element, such a...

>

Using Design Parameters with Ansys Icepak

Jul 25, 2024 - Utilizing design parameters allows quick adjustments to frequently used parameters without redefining the entire model. This efficiency is particularly beneficial when setting up m...

>

3DLayout to Icepack looping example

Jul 18, 2024 - The following example illustrates the use of 3D Layout and Icepack to perform thermal analysis. HFSS can be used with Icepack, but not with DC. SIwave and Icepack can also be used ...

>

Thermoelectric Cooler (TEC) Modeling with Ansys Icepak

Jul 17, 2024 - In this 23-minute tutorial video, we demonstrate how to simulate a PCB (printed circuit board) with a heat-generating package cooled by a Thermoelectric Cooler (TEC) using Ansys Ic...

>

Ansys EnSight Application: Plotting a Variable Along a Rotating Component

Jul 13, 2024 - This video is a valuable resource for engineers and professionals in the field of Computational Fluid Dynamics (CFD). It provides a detailed step-by-step guide on how to plot a var...

>

Joule (trace) Heating Simulation with Ansys Icepak

Jul 13, 2024 - This video presents a comprehensive workflow for simulating Joule heating using Ansys Icepak, a powerful tool for thermal management in electronics. Building upon our previous tuto...

>

PCB Modeling with Ansys Icepak

Jul 13, 2024 - This video provides an in-depth look at the thermal modeling of Printed Circuit Boards (PCBs) using Ansys Icepak, a powerful tool for electronics thermal management. PCBs are compl...

>

Solving DC and AC Inductance in Ansys Q3D

Jul 12, 2024 - Hi there! This video shows how to solve for both DC and AC inductance using Ansys Q3D. At Ozen Engineering Inc. (https://www.OzenInc.com) we help engineers learn how to use Ansys ...

>

KLayout: Connection to Lumerical, and Introduction to WDM-part 3 (WDM)

Jul 11, 2024 - In this video, we'll dive into how to efficiently use KLayout and connect it to Lumerical. We'll start with the necessary libraries for installation and provide a hands-on example ...

>

Connection to Lumerical, and Introduction to WDM-part 2 ( Connection to Lumerical)

Jul 11, 2024 - In this video, we'll dive into how to efficiently use KLayout and connect it to Lumerical. We'll start with the necessary libraries for installation and provide a hands-on example ...

>

Video1 - NuHertz: Introduction to the FilterQuick Interface

Jul 10, 2024 - Introducing NuHertz's FilterQuick interface. NuHertz is a program for designing filters. There are two interfaces available: Advanced and FilterQuick. It is possible for users to d...

>

Video2 - NuHertz: Introduction to the Advanced Interface

Jul 10, 2024 - Introducing NuHertz's Advanced interface. NuHertz is a program for designing filters. There are two interfaces available: Advanced and FilterQuick. It is possible for users to desi...

>

Cold Plate Modeling with Ansys Icepak AEDT

Jul 10, 2024 - This video tutorial demonstrates the powerful capabilities of Ansys AEDT Icepak in solving a simple yet comprehensive cold plate thermal problem. The main focus is on showcasing Ic...

>

How to setup a solidification and melting problem in Ansys Fluent.

Jul 8, 2024 - This video demonstrates ANSYS's powerful capabilities in simulating casting solidification and melting processes. ANSYS offers a comprehensive suite of tools combining finite eleme...

>

Simulation of Moving Heat Sources using ACT - Ansys

Jul 8, 2024 - The simulation of moving heat sources can be achieved using CFD and FEA tools, and each approach has pros and cons. In this video, you will learn how to use an ACT (accessible from...

>

Simulation of a Transfer Chute using Ansys Rocky

Jul 8, 2024 - This video demonstrates how to set up and analyze a transfer chute simulation using Ansys Rocky, a powerful discrete element modeling (DEM) software. Transfer chutes are critical c...

>

Static Angle of Repose using Ansys Rocky

Jul 8, 2024 - This video tutorial demonstrates how to use Ansys Rocky to simulate and measure the Static Angle of Repose (SAOR), a crucial property of bulk materials that indicates their ability...

>

Using KLayout: Installation, Connection to Lumerical, and Introduction to WDM-part 1 (Installation)

Jul 6, 2024 - In this video, we'll dive into how to efficiently use KLayout and connect it to Lumerical. We'll start with the necessary libraries for installation and provide a hands-on example ...

>

Augmented Reality Development Workflow: Lumerical, Zemax, and Speos Integration-Part1

Jul 3, 2024 - Discover the comprehensive workflow for developing augmented reality systems using advanced simulation tools. This video covers key steps including waveguide simulation with Lumeri...

>

Piezoelectric Flexure simulation using Ansys Mechanical

Jun 27, 2024 - This video shows how easy it is to setup a fully coupled piezoelectric flexure. We take an example model from Thorlabs and simulate it's performance. Ansys has been used in Piezoe...

>

AnsysMotorCAD Thermal

Jun 23, 2024 - Hello, Motor Fans: In this blog I discuss how to use the Thermal physics model in Ansys Motor-CAD to perform thermal analysis on an IPM motor. I show the various cooling systems t...

>

AnsysMaxwell CoreLoss

Jun 23, 2024 - Hello, Motor Fans: In this blog I use Ansys Maxwell to compute the core loss of a toroidal inductor and validate the results using the manufacturer's material specification sheet ...

>

TwinMesh with Ansys Workbench CFX and Parametric Analysis

Jun 22, 2024 - The video provides the step-by-step procedure of using TwinMesh generated grids in Workbench CFX application. The details of performing a parametric analysis can also be found.

>

Converting STL to 3D CAD in Ansys Discovery using SubD

Jun 20, 2024 - This video shows a very fast method for converting STL geometry into 3d CAD. We take an example of 3d scanned lumbar and convert it into a SubD model in Ansys Discovery. A SubD mod...

>

Creating Weld Mesh efficiently using Discovery and Mechanical

Jun 15, 2024 - In this video, we'll see how to create weld bodies in Discovery to be transferred to Mechanical and how to create welds for the entire assembly in an efficient manner.

>

Ansys Motor-CAD: E-NVH Analysis

Jun 12, 2024 - Hello, Motor Fans: In this blog I discuss how to use the Mechanical physics module in Ansys Motor-CAD to perform E-NVH analysis and determine which modes of motor operation contri...

>

Unlocking the Versatility of Ansys Polyflow: A Gateway to Industrial Innovation

Jun 12, 2024 - The primary strength of ANSYS Polyflow lies in its ability to simulate non-Newtonian fluids, ubiquitous in industrial processes, from the intricate flows encountered in polymer pro...

>

Enhanced Electronics Cooling Using Parametrization in Ansys Icepak

May 31, 2024 - Ansys Icepak is used to create the geometry of a PCB circuit, including a fan for heat dissipation. The parametrization tool is applied to the fan's position to determine the optim...

>

Introduction to TwinMesh

May 22, 2024 - The basic features and applications of TwinMesh software are described. A sample 2D Lobe Pump workflow is demonstrated, from grid generation with TwinMesh to CFD post-processing fo...

>

Ansys Motor-CAD: Mechanical Rotor Stress and Displacement

May 17, 2024 - Hello, Motor Fans: In this video I discuss how to use the Mechanical physics module in Ansys Motor-CAD to analyze Rotor Stresses and Displacement by performing rotor endurance tes...

>

Mastering Meshing Methods in Ansys Discovery Refine Mode

May 7, 2024 - In this video, you will learn how to enhance CFD analysis meshing for air cooling in a server room using Ansys Discovery's Refine mode. It also covers slicing the mesh, inspecting ...

>

Using Meshing Fidelity in Ansys Discovery's Explore Mode for Room Cooling

May 7, 2024 - This video explains how to properly set the mesh size for a CFD analysis of cooling a server room and notes the limitations of meshing in Explore mode.

>

Meshing Fidelity in the Explore Mode in Ansys Discovery

May 7, 2024 - This tutorial video illustrates how to adjust meshing fidelity in Explore mode by using the fidelity slider and Global Fidelity tab to check and modify the mesh size. It will show ...

>

Ansys Simulation World: Hear from Rolls-Royce, BMW, Amazon, Microsoft & many more

May 2, 2024 - See which topics you'd want to watch at this year's Sim World here: https://www.simulationworld.com/?utm_campaign=brand&utm_medium=referral&utm_source=channel-partner&utm_content=c...

>

Ansys Motor-CAD: Lab Module Efficiency Maps, Duty Cycle, and Operating Points

May 1, 2024 - Watch Simulation World: https://www.simulationworld.com/?utm_campaign=brand&utm_medium=referral&utm_source=channel-partner&utm_content=channel_multiple_simulation-world-ozen-031520...

>

Sim World Pt 2: GLOBE, Rolls-Royce and Hydrogen Fuel Cells

May 1, 2024 - GLOBE partnered with Rolls-Royce to develop a new kind of hydrogen fuel cell that could serve is a more sustainable and efficient power source for EVs.

>

Sim World Pt 1: NASA Mission

May 1, 2024 - Westinghouse is developing the preliminary designs for a nuclear-powered space system that'll be used in an upcoming NASA mission.

>

PyAEDT: Building a Rectifier in Twin Builder

Apr 30, 2024 - Watch Simulation World: https://www.simulationworld.com/?utm_campaign=brand&utm_medium=referral&utm_source=channel-partner&utm_content=channel_multiple_simulation-world-ozen-031520...

>

CFD Simulation of a Firearm Silencer

Apr 30, 2024 - Explore the capabilities of Ansys tools in this video as we model a firearm silencer. Using a generic silencer design, we compare predicted sound intensities with and without the s...

>

Validating Ansys Maxwell: In-Depth with TEAM 3 Test Case

Apr 26, 2024 - In this tutorial, we delve deep into the validation process of Ansys Maxwell using the standardized TEAM 3 test case from the TEAM Workshops series. This video provides a step-by-s...

>

Comprehensive Fatigue Analysis Using Ansys Aqwa Hydrodynamic Diffraction Results

Apr 26, 2024 - This video provides a detailed walkthrough of setting up a Hydrodynamic Diffraction analysis in Ansys Aqwa, followed by structural analysis using the Static Structural module. We c...

>

Ansys CFD-Post: How to Postprocess Relative Humidity

Apr 26, 2024 - This tutorial provides a comprehensive overview of how to manage temperature and relative humidity in CFD simulations involving ambient air and industrial flows. Learn the correct ...

>

Ansys Motor-CAD: LAB Torque Speed Curves

Apr 25, 2024 - Hello, Electric Motor Fans: In this blog I discuss how to use Ansys Motor-CAD to obtain torque speed curves via the LAB module. The Maximum Torque Per Amp motor control strategy i...

>

PyAEDT: How to Control the Ansys Electronics Desktop with Python

Apr 24, 2024 - Explore the capabilities of PyAEDT to enhance your simulations within Ansys Electronics Desktop. This video offers a focused tutorial on using PyAEDT for creating and managing cont...

>

Ansys Maxwell: How to Model Motor Imperfections with the Eccentricity ACT

Apr 23, 2024 - Unlock the full potential of electromagnetic simulation in our latest tutorial on Ansys Maxwell's Eccentricity ACT. This video provides a comprehensive guide on accurately modeling...

>

Brief Review of Ansys EnSight - Part 2.

Apr 16, 2024 - Line clip, spline generation, and plotting along clips. From command to Python scripting

>

Calculation of Electronic Package Thermal Resistance with Ansys Icepak

Apr 13, 2024 - Let's talk about thermal integrity for electronics systems. Ansys Icepak is a specialized software that predicts thermal field and cooling solutions for IC packages, printed circui...

>

Ansys Motor-CAD: Demagnetization Modelling and Analysis of an IPM Motor

Apr 11, 2024 - Hello, Motor Fans: In this video I show how to use Ansys Motor-CAD to model the demagnetization of an Interior Permanent Magnet (IPM) motor and analyze the affects on the magnets...

>

Biosensor simulation using Ansys lumerical

Apr 11, 2024 - n this guide, we explore the Biosensor simulation using Ansys Lumerical FDTD. More information: https://blog.ozeninc.com/resources/biosensor-simulation-using-ansys-lumerical ? V...

>

Hydrogen Storage design: Simulating Composite Tanks

Apr 10, 2024 - In this webinar, we're going to demonstrate the modeling process of a Type III hydrogen tank using ACP Pre. We'll discuss how the simulation process inside the Ansys suite will hel...

>

Improving productivity in Mechanical with Object generator

Apr 10, 2024 - The object generator tool is explained, and we show how to use it in several ways. This simple but unknow tool may help users to build models faster and reducing mistakes probabili...

>

Dichroic Beam Splitter and Fluorescence Wave Shift in Zemax

Apr 8, 2024 -

>

Ansys EnSight: Brieff Review - Part1

Apr 8, 2024 - In this video we show how to upload a CFX data file into Ensight to create plots, contours, cross sections and states.

>

BladeGen Software User Interface

Apr 6, 2024 - BladeGen is a geometry creation tool that is specialized for turbomachinery blades. It is developed for turbomachinery designers. The GUI allows for 3D design of blade, hub and shr...

>

Vista Radial Turbine Design (RTD) tool by Ansys

Apr 6, 2024 - First we define the operating condition for our turbine and some basic geometric constraints. The tool then comes up with a meanline design and predicted performance data using kno...

>

Design of a Radial Turbine using Ansys TurboSystem

Apr 6, 2024 - We will use Ansys tools Vista RTD, BladeGen, Vista TF and CFD-Post to design, analyze and post-process a turbine blade.

>

Ansys Motor-CAD: Overview of an IPM Motor Emag Model

Apr 4, 2024 - Hello, Motor Fans: In this blog I provide an overview of using the Motor-CAD Emag module to model the electromagnetics of a motor and I use an Interior Permanent Magnet (IPM) moto...

>

MicroLED simulation with Lumerical FDTD

Apr 3, 2024 - In this guide, we explore the MicroLED simulation using Ansys Lumerical FDTD. More information: https://blog.ozeninc.com/resources/elevating-micro-led-design-the-synergy-of-stack-...

>

MicroLED simulation workflow with Ansys Lumerical

Apr 3, 2024 - In this guide, we explore the workflow of MicroLED simulation using Ansys tools as demonstrated in this video. More information: https://blog.ozeninc.com/resources/elevating-micro...

>

Transient Thermal Modeling of PCR Thermocycling Using ANSYS Fluent

Apr 1, 2024 - This transient thermal model simulates the temperature inside a microreactor for one cycle of polymerase chain reaction, including 1) denaturation, 2) annealing, and 3) extension. ...

>

Dye Washout with Scalar Transport Equation in ANSYS CFX-Case Study of Blood Flow Through Aortic Arch

Apr 1, 2024 - This video demonstrates the implementation of a residence time investigation method. A numerical dye washout technique was used in a generic aortic arch. Simple and useful applicat...

>

Ansys Maxwell: Inception and Breakdown Voltage Calculations

Mar 28, 2024 - Hello, Electric Arc Fans: In this video I discuss localized polarization and dielectric breakdown within a dielectric and show how to use Ansys Maxwell to calculate inception and ...

>

EMC Plus: HIRF Coupling to an Aircraft Demo (Part 2)

Mar 27, 2024 - Hi there! This video demonstrates the EMC Plus workflow for a high intensity radiated field simulation. At Ozen Engineering Inc. (https://www.OzenInc.com) we help engineers learn ...

>

EMC Plus: HIRF Coupling to an Aircraft Demo (Part 1)