Videos > 2mins SIwave: Changing the trace cross-section shape
May 5, 2023
How to Change the Cross-Section Shape of Traces in SI Wave
This guide will walk you through the steps to change the cross-section shape of traces in SI Wave.
Steps to Change Trace Cross-Section Shape
- Open the Layer Stack Up Editor in SI Wave.
- Select the desired layer or choose all layers.
- Click on the option labeled Trace Cross-Section.
- Choose from the available cross-section shapes:
- Trapezoidal
- Hexagonal
- Other shapes as needed
- Adjust the parameters to account for etching:
- Set the ratio or specify dimensions.
- For example, set the bottom to 100% and the top to 85%.
- Click OK to apply the changes.
Thank you for using this guide provided by Ozen Engineering, Inc.
[This was auto-generated. There may be mispellings.]
Title: "2mins SIwave: Changing the Trace Cross-Section Shape" "How to change the cross-section shape of traces in SI Wave: 1. Go to the layer stack-up editor. 2. Select the layer(s) you want to modify. 3. Click "Trace Cross-Section." 4. Choose from available shapes, such as trapezoidal or hexagonal. 5. For example, to address etching, enter numbers, set the ratio, or set the bottom to 100% and the top to 85%. 6. Click "OK." Thank you."
