Events

ANSYS CFD Quickstart

We're sorry, but all tickets sales have ended because the event is expired.
  • December 18, 2014
    2:00 am - 4:00 am
  • January 23, 2018
    9:00 am - 5:00 pm
  • February 16, 2018
    9:00 am - 5:00 pm
  • March 16, 2018
    8:00 am - 4:00 pm
  • April 12, 2018
    8:00 am - 4:00 pm
  • May 31, 2018
    8:00 am - 4:00 pm
  • June 22, 2018
    8:00 am - 4:00 pm
  • July 20, 2018
    8:00 am - 4:00 pm
  • August 9, 2018
    8:00 am - 4:00 pm
  • September 21, 2018
    8:00 am - 4:00 pm
  • October 12, 2018
    8:00 am - 4:00 pm
  • November 8, 2018
    9:00 am - 5:00 pm
  • December 7, 2018
    9:00 am - 5:00 pm

Overview ANSYS CFD (Fluent and CFX) software contains the broad physical modeling capabilities needed to model flow, turbulence, heat transfer, and reactions for industrial applications ranging from air flow over an aircraft wing to combustion in a furnace, from bubble columns to oil platforms, from blood flow to semiconductor manufacturing, and from clean room design (more…)

ANSYS Mechanical Quickstart

We're sorry, but all tickets sales have ended because the event is expired.
  • January 16, 2018
    9:00 am - 5:00 pm
  • February 15, 2018
    9:00 am - 5:00 pm
  • March 20, 2018
    8:00 am - 4:00 pm
  • April 13, 2018
    8:00 am - 4:00 pm
  • May 15, 2018
    8:00 am - 4:00 pm
  • June 14, 2018
    8:00 am - 4:00 pm
  • July 19, 2018
    8:00 am - 4:00 pm
  • August 14, 2018
    8:00 am - 4:00 pm
  • September 20, 2018
    8:00 am - 4:00 pm
  • October 19, 2018
    8:00 am - 4:00 pm
  • November 15, 2018
    9:00 am - 5:00 pm
  • December 18, 2018
    9:00 am - 5:00 pm

Overview This course presents the most essential concepts from Introduction to ANSYS Mechanical in a single day. It is intended for users who have little or no experience with ANSYS Mechanical and must come up to speed very quickly on its most basic capabilities. The student learns and applies complete solution procedures for structural, modal, thermal, and (more…)

ANSYS Electromagnetics Quickstart

We're sorry, but all tickets sales have ended because the event is expired.
  • March 13, 2018
    8:00 am - 4:00 pm
  • April 27, 2018
    8:00 am - 4:00 pm
  • June 1, 2018
    8:00 am - 4:00 pm
  • July 27, 2018
    8:00 am - 4:00 pm
  • August 31, 2018
    8:00 am - 4:00 pm
  • September 28, 2018
    8:00 am - 4:00 pm

Overview This course presents the most essential concepts from Introduction to ANSYS Maxwell & Introduction to ANSYS HFSS in a single day. It is intended for users who have little or no experience with ANSYS Electromagetic products and must come up to speed very quickly on the most basic capabilities. Prerequisites A general knowledge of electromagnetic phenomena is (more…)

ANSYS Mechanical Quickstart (2019)

We're sorry, but all tickets sales have ended because the event is expired.
  • January 10, 2019
    9:00 am - 5:00 pm
  • February 7, 2019
    9:00 am - 5:00 pm
  • March 7, 2019
    9:00 am - 5:00 pm
  • April 11, 2019
    8:00 am - 4:00 pm
  • May 9, 2019
    8:00 am - 4:00 pm
  • June 6, 2019
    8:00 am - 4:00 pm
  • July 11, 2019
    8:00 am - 4:00 pm
  • August 8, 2019
    8:00 am - 4:00 pm
  • September 5, 2019
    8:00 am - 4:00 pm
  • October 10, 2019
    8:00 am - 4:00 pm
  • November 7, 2019
    9:00 am - 5:00 pm
  • December 5, 2019
    9:00 am - 5:00 pm

Overview This course presents the most essential concepts from Introduction to ANSYS Mechanical in a single day. It is intended for users who have little or no experience with ANSYS Mechanical and must come up to speed very quickly on its most basic capabilities. The student learns and applies complete solution procedures for structural, modal, thermal, and (more…)

ANSYS CFD Quickstart (2019)

We're sorry, but all tickets sales have ended because the event is expired.
  • January 15, 2019
    9:00 am - 5:00 pm
  • February 14, 2019
    9:00 am - 5:00 pm
  • March 14, 2019
    8:00 am - 4:00 pm
  • April 18, 2019
    8:00 am - 4:00 pm
  • May 10, 2019
    8:00 am - 4:00 pm
  • June 13, 2019
    8:00 am - 4:00 pm
  • July 18, 2019
    8:00 am - 4:00 pm
  • August 15, 2019
    8:00 am - 4:00 pm
  • September 12, 2019
    8:00 am - 4:00 pm
  • October 17, 2019
    8:00 am - 4:00 pm
  • November 14, 2019
    9:00 am - 5:00 pm
  • December 12, 2019
    9:00 am - 5:00 pm

Overview ANSYS CFD (Fluent and CFX) software contains the broad physical modeling capabilities needed to model flow, turbulence, heat transfer, and reactions for industrial applications ranging from air flow over an aircraft wing to combustion in a furnace, from bubble columns to oil platforms, from blood flow to semiconductor manufacturing, and from clean room design (more…)