Message from the President

metinBy Metin Ozen

We started October with a small amount of precipitation here in Silicon Valley. It is a most welcome moment during this historical drought we are in. We are hoping that this is the beginning of a rainy fall and winter. We need to make up for one year of rain! So, it is exciting to see raindrops early in October.

This month, we are also excited about ANSYS Low and High Frequency

Electromagnetics software products. We are getting very positive feedback from our clients as well as our in-house use of these simulation products proved them to be the industry leading simulation products. It is not only the one physics we can solve for but also coupling different physics and simulating the full product performance. A good example is a wearable device; these devices have high frequency antennas wrapped in an almost circular shape which changes the performance of the antenna from its original shape. Using ANSYS simulation software tools, designers and maufacturers of these wearables devices can simulate the performance of the antennas as well as addressing mechanical reliability and any comfort/heat transfer aspects. You are going to find more detailed information on this in this newsletter in addition to a lunch and learn event we will have later in October. We will also have a lunch and learn event on Icepak late in the month. So, welcome to October and please let me know if/how I can be of help with your simulation software needs.


Message from the Sales Manager

caseyBy Casey Heydari

ANSYS and Cray Smash Supercomputing Records!


We are pleased to announce that ANSYS and Cray Inc. have smashed the previous simulations record by scaling ANSYS Fluent to 129,000 compute cores!


The previous record about a year ago when ANSYS announced that Fluent has scaled to 36,000 cores with the help of NCSA. The dramatic 4x performance improvement over the previous record is not only significant but also opens up possibilities for complete virtual prototype and build! The complex multiphysics simulation on an industrial combustor was run on Cray XC30 supercomputer at 90% efficiency.

Though majority of our customers will not run more than 1000 cores, this technological breakthrough demonstrates that the capabilities are readily available at the fingertips for virtual prototyping.

The flexible ANSYS HPC licensing options allow scalability to desirable computational level a simulation requires, from individual HPC bundles to small workgroups up to virtually unlimited parallel capability.

ANSYS HPC can dramatically improve productivity of the engineers, reduce costs and improve product’s time-to-market.


If you are interested to learn more about the ANSYS HPC offerings, please contact me at:


(408) 732-4665


Paper of the Month!

Design and Simulation of Implantable PIFA in Presence of ANSYS

Human Body Model for Biomedical Telemetry Using ANSYS HFSS

By Mehrnoosh Khabiri


Download Paper


Tip of the Month!

               ANSYS HFSS for Antenna Arrays

mehrnooshBy Mehrnoosh Khabiri

ANSYS HFSS offers very advanced features for antenna designs. For large finite arrays, you can do explicit analysis and analyze the entire finite array model in HFSS.  Although major challenges in explicit are large number of elements (unit cells), large number of excitations, and complicated meshing process. The other solution is finite array Domain Decomposition (DDM). It utilizes replicated DDM unit cell to address array concerns and obtains accurate results that match HFSS explicit simulations. Also, DDM distributes RAM and reduces solve time. Try it and take advantage of Finite Array DDM Tool!



ANSYS Hot Topics!



By Ben Habr

Have you seen what ANSYS AIM can do? This tool is a fully integrated multiphysics simulation environment created with all engineers in mind. This is the further realization of ANSYS Workbench which is revolutionizing engineering processes through simulation driven product development. Take a look at our overview video below and visit our ANSYS AIM page to see it in action!

[embedyt] http://www.youtube.com/watch?v=vXJw3LSpj24[/embedyt]

ANSYS AIM in Action

Lunch & Learn – ANSYS HFSS

October 20th, 2015 11:30AM to 1:00PM (lunch provided)


Join us for this upcoming Lunch & Learn about ANSYS HFSS!

This workshop will review HFSS capabilities for antenna analysis. The important antenna parameters are reviewed, and different aspects of antenna design using HFSS will be discussed.

Reserve a seat now and we’ll show how ANSYS can help you to simulate high frequency interactions and solve radiation challenges.

Register Now


Lunch & Learn – ANSYS Icepak

October 27th, 2015 11:30AM – 1:00PM (lunch provided)

Join us for this upcoming Lunch & Learn about ANSYS Icepak!

We would like to share with you the latest developments in rapid simulations for electronic systems. ANSYS Icepak combines advanced solver technology with robust, automatic meshing to enable engineers to rapidly perform heat transfer and fluid flow simulation for a wide variety of electronic applications including computers, telecommunications equipment, semiconductor devices, aerospace, automotive and consumer electronics.


Join us for this free seminar to see how you can apply ANSYS Icepak to your projects!

Register Now


OzenCloud Online Webinar – October 7th, 2015

Scale Up Your ANSYS Workloads

ozen cloud newest

Is your compute environment too small to handle your ANSYS workloads?

In the first 15 minutes of the webinar, you will learn about OzenCloud’s ANSYS offering.

Next 30 minutes will be a step by step, guided demonstration for all participants who are interested in learning how to scale ANSYS on OzenCloud.

We will reserve the last 15 minutes for your questions.

This webinar is co-organized by Ozen Engineering and UberCloud.

Online webinar – October 7th, 2015 at 11:00 AM – 1:00 PM PST

Register Now


Upcoming ANSYS Training/Events In October

OzenCloud Webinar

ANSYS Mechanical Linear and Nonlinear Dynamics

Introduction to ANSYS Mechanical

NEW! ANSYS HFSS – Free Lunch & Learn

ANSYS AIM Multiphysics

Introduction to ANSYS SpaceClaim Direct Modeler

NEW! ANSYS Icepak – Free Lunch & Learn

Introduction to ANSYS Composite PrepPost

Browse and sign up for classes directly on our website, no phone call or email needed.


Dynardo News

optiSLang Newsletter – 4 Quarter 2015


Download Newsletter



PromotionalOctober Promotional Code:


Use the promotion code above to learn about our exclusive offers!

Every month, Ozen Engineering offers a special promotion on ANSYS products and/or training classes. Please visit our promotions page to learn more about our exclusive promotional pricing.

Learn More

Ozen Engineering, Inc. Newsletter

1210 E. Arques Ave #207

Sunnyvale, CA 94085

(408) 732-4665


ANSYS Channel Partner & Distributor – Ozen Engineering, Inc.


Ozen Engineering, Inc. provides ANSYS simulation software sales, training, technical support and consulting services.

Copyright © 2015. All Rights Reserved.