Introduction to ANSYS Mechanical(2020)
- January 7, 2020 - January 8, 2020
9:00 am - 5:00 pm - February 4, 2020 - February 5, 2020
9:00 am - 5:00 pm - March 3, 2020 - March 4, 2020
9:00 am - 5:00 pm - April 7, 2020 - April 8, 2020
8:00 am - 4:00 pm - May 5, 2020 - May 6, 2020
8:00 am - 4:00 pm - June 2, 2020 - June 3, 2020
8:00 am - 4:00 pm - July 7, 2020 - July 8, 2020
8:00 am - 4:00 pm - August 4, 2020 - August 5, 2020
8:00 am - 4:00 pm - September 1, 2020 - September 2, 2020
8:00 am - 4:00 pm - October 6, 2020 - October 7, 2020
8:00 am - 4:00 pm - November 3, 2020 - November 4, 2020
9:00 am - 5:00 pm - December 1, 2020 - December 2, 2020
9:00 am - 5:00 pm
Overview
ANSYS Mechanical provides solutions for many types of analyses including structural, thermal, modal, linear buckling and shape optimization studies.
ANSYS Mechanical is an intuitive mechanical analysis tool that allows geometry to be imported from a number of different CAD systems. It can be used to verify product performance and integrity from the concept phase through the various product design and development phases.
The use of ANSYS Mechanical accelerates product development by providing rapid feedback on multiple design scenarios, which reduces the need for multiple prototypes and product testing iterations.
Each course chapter is followed by “hands-on” workshops and exercises.
Prerequisites
- A technical education and a background in the fundamentals of engineering mechanics and finite element analysis are recommended. An engineering degree is not required.
Course Topics
- Introduction
- Pre-processing
- Structural Analysis
- Post-processing, Validation, CAD, and Parameters
- Mesh Control
- Connections and Remote Boundary Conditions
- Modal, Thermal, and Multi-step Analysis
- Eigenvalue Buckling and Sub-modeling (optional)
Typical Agenda
9:00AM – Class Begins
12- 1:00PM – Lunch Served
5:00PM – Class Ends
Cost: $600/day